00POE Please give us a chance to aka it right and do better ! Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP | US office: Montana ~~ UK office: Ipswich AU office: Training fe COST WAY' USER’S MANUAL Contact Us! 3 PCS RATTAN BAR SET ie | Do NOT return this item. Kee ese oom Contact our friendly customer service department for help first. >) THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
02 B Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used. Keep the hand tools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.
L¢ COST WAY 02 B Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used. Keep the hand tools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.
Part & Hardware List ! Bx2 Chair Leg Frame Chair Seat Frame Ex2 Fx1 Front Frame Table Lek Frame Ixi Table Glass Iyx16 @ x24 Bolt Méx15mm Bolt M6x40mm \ x44 J wx washers 04 Stretcher Gx1 Table Right Frame @ x2 Bolt Mexico ®x Allen key M4 Ix2 [OF] Nut M8 @xt Spanner STEP 1 (2 x Chairs assembly) Connect Char leg frame (A), & Stretcher (C) with Bolt (1) & Washers (5) Connect Part from STEP 1 & Chair leg frame (A) with Bolt (1) & Washers (5) CIE 05
COST WAY Part & Hardware List STEP 1 {2 x Chairs assembly) £ Connect Char leg frame Pe “ (A), & Stretcher (C) with Bolt (1) & Washers (5) Ax4 Bx2 Chair Leg Frame Chair Seat Frame Stretcher Table Top Frame Bx2 Fx1 Gx1 Hx2 Front: Frame Table Left Frame Table Right Frame Bottom Frame STEP 2 x1 2 Table Glass Lo Seat Cushion ~~ TTT Connect Part from STEP 1 & Chair leg frame (A) with Bolt (1) & Washers (5) ® @ Iyx16 @ x24 @ x2 [OF] Bolt Méx15mm Bolt M6x40mm Bolt Méx60mm Nut M6 \ x44 ®x Gxt | wee washers Allen key
STEP 11 COST WAY Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish Is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
COST WAY 10 STEP 11 Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish Is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
