Owner's Manual

19-EN
About the Shortcut Setup Screen
Displaying the Sound Setup screen, or the Shortcut Setup screen of the
Rear Seat Entertainment System screen.
Touch the top part of the Audio source screen.
The Sound Setup screen or the Rear Seat Entertainment System
Setup Screen is displayed.
Sound Setup screen (Tone Adjustment mode) example
Close the window
You can adjust the Navi voice interrupt volume (Navi Guide)
and the Background Audio volume during Navi Guide.
Navi Volume : 1 -35
Background Audio : 0 -35
Button for Display Off *
Displays the registered Bluetooth Device List screen.
• See “Pairing a Bluetooth Device” (page 29).
Touch this to change to the currently playing source screen.
Displays the Hands-free Device Primary/Secondary setting
screen.
• See “Hands-free Device Primary/Secondary Setting” (page 30).
* Display Off mode
- To cancel Display Off mode, touch the screen or press any button
(except / or / button).
- Display Off mode is canceled when the power or ACC is turned off.
- When the gear lever is shifted to the reverse (R) position and the rear
camera is connected, the rear camera image is displayed.
- When a call is received on a Bluetooth-connected phone, the
incoming call screen is displayed.
Tone Adjustment mode
BASS ENGINE SQ mode
Button for changing the BASS ENGINE SQ mode screen
Balance/Fader Image area*
1
• To reset to the initial settings (Balance: 0, Fader: 0), touch [].
Rear Seat Entertainment Function screen switch button
• When Setting the Rear Seat Entertainment is “Off,” you cannot
change the screen. For details on Rear Seat Entertainment setting,
see “Rear Seat Entertainment Setup” (page 48).
Buttons for switching between Front/Rear when adjusting
Bass/Treble*
2
Buttons for adjusting Bass Level/Treble Level*
3, 4
Buttons for adjusting Media Xpander *
1, 3, 5
Buttons for adjusting Subwoofer On/Off and Subwoofer
Level *
1, 3
Button for changing the Tone Adjustment mode screen
• If changing to the Tone Adjustment mode, BASS ENGINE SQ
mode will be disabled.
Buttons for adjusting the BASS ENGINE Level*
4
Buttons for selecting the BASS ENGINE type *
4
*1 You can perform a more detailed set up in “Sound Setup” (page 31).
*2 You cannot switch when Front/Rear Sync in “Adjusting the Parametric
Equalizer Curve (Dual HD EQ)” (page 33) is “On.”
*3 When you switch to the BASS ENGINE SQ mode, the value you have
set is ignored.
*4 When the Defeat setting is “On,” you cannot perform the set up.
*5 Not available during an interruption such as traffic announcement is
broadcasting.
Sound Setup Function