Owner's Manual

18
2.3.6 Lane information and signposts
When navigating on multi-lane roads, it is important to take the appropriate lane in order to follow the
planned route. If lane information is available in the map data, Alpine Navigation System displays the
lanes and their directions using small arrows at the bottom of the map. Highlighted arrows represent
the lanes and the direction you need to take.
Where additional information is available, arrows are replaced by signposts. Signposts are displayed
at the top of the map. The color and style of the signposts are similar to the real ones you can see
above roads or by roadsides. They show the available destinations and the road numbers.
All signposts look similar when cruising (when there is no planned route). During navigation only the
signpost that points to the lane(s) to be taken is highlighted; all the others are darker.
If you want to hide the currently displayed signposts, tap any of them and the normal Navigation view
returns until new signpost information is received.
You can modify the signpost settings in . See page 79.
2.3.7 Junction view
If you are approaching a freeway exit or a complex intersection and the needed information exists, the
map is replaced with a 3D view of the junction. The lanes you need to take are displayed with arrows.
At the top of the screen, road signs show you additional information.
If you want to hide the currently displayed junction and return to the Navigation view, tap the picture.
Junction view can be turned off in . See page 79.
2.3.8 Tunnel view
When entering a tunnel, the map is replaced with a generic tunnel image so that surface roads and
buildings cannot distract you.