Owner's Manual

Owner's manual r=_ Loc~ion of Controls, Turni~g Power On 2r Off =:::J
' Getting Started
Location of Controls
The screen design used in the Owner's Manual may differ from the actual screen.
For X308U/INE-W987HD ForX409
(D
Microphone (X308U/INE-W987HD only)
(f)
~/~button
Used for Hands-free or Voice Con t rol modes. Press to seek down/up a station in radio mode or
®
/' (AUDIO) button
down/up a track, chapter, etc., in other audio/visual
sources.
Displays the AudioNisual screen. If the AudioNisual
@
screen is already displayed, changes the source.
RESET switch
@
for VOICE button
The system of this unit is reset.
Depending on the connected smartphone, press to
®
@(NAV) button
reca ll Siri function or vo i ce recognition mode. Reca ll s the navigation map screen.
@
+/-or A/ V (UP/DOWN) button
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to
Press to adjust the vol ume.
change to Go Home route screen. (If Home is not set
®
* (Favorite) button
yet, it will change to the Home setting screen.)
Recalls the Favorite screen.
For details of nav igation operations, refer to "Navigation
System OM"in the website at
• Press and hold this button for at least 2 seconds to
http://www.alpine-usa.com.
switch to the iDatalink mode screen. (When
connected to the optional iDatalink module.)
@)
Remote Sensor
®
MENU/ (Power Off) button
Point the remote control transmitter towards the
Recalls the Menu screen.
remote sensor within a range of 2 meters.
Press and hold this button for at least 5 seconds to turn
@
~ (CAMERA) button (X409 only)
the power off.
Recalls the camera image screen.
4 -EN