Owner`s manual

62-EN
Installation and Connections
When Connecting External Equipment (If an IONBUS compatible
head unit is not connected)
TMI-M990
AV-Interface unit
1
3
2
5
6
6
q
REMOTE IN (AUX2) REMOTE OUT
REMOTE OUT (AUX1) REMOTE IN
4
7
8
p
9
9
To Audio Input terminal
To Video Input terminal
System Switch: When “STANDALONE” is set (See page 58)
1
RGB Cable
2
Power Supply Connector
3
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation System.
4
AUX Audio Output (AUX1) (L) Terminal
When the System Switch is set to STANDALONE:
AUX1 Audio Output Terminal is used as the audio output for the main unit.
A separately sold Amplifier Speaker is required if using this unit by itself.
There is no output from the AUX1 Video Output Terminal.
5
AUX Video/Audio Output (AUX2) Terminal
6
RCA Extension Cable (Sold separately)
7
AUX Video Input (AUX1) Terminal
8
AUX Audio Input (AUX1) Terminal
9
RCA Extension Cable
p
Remote Control Output Lead (White/Brown)
q
Remote Control Input Lead (White/Brown)
Navigation system
(Sold Separately)
Amplified Speaker
(Sold Separately)
Rear monitor 2
(Sold Separately)
To Audio Input terminal
(White/Brown)
(White/Brown)
NVE-N099P/NVE-N077PS
TV TUNER
(Sold Separately)
(White/Brown)
(White/Brown)
System Example