Owner`s manual

21-EN
Selecting the VISUAL EQ
TM
Property
1 Select VISUAL EQ ON mode by pressing VISUAL
EQ.
• When VISUAL EQ is ON, the selected VISUAL EQ property
name is displayed. (See page 20)
•“OFF” is set on this unit when the power is turned on. Press
VISUAL EQ to display “FLAT”.
2 Press and hold VISUAL EQ for at least 2 seconds.
The VISUAL EQ SETUP screen is displayed.
3 Press OPEN/CLOSE / SETUP and select VISUAL
EQ.
2 Press and hold VISUAL EQ for at least 2 seconds.
The VISUAL EQ SETUP screen is displayed, and
various VISUAL EQ settings can be made.
VISUAL EQ ON OFF
Continued
<Example of VISUAL
EQ SETUP screen>
3 To exit VISUAL EQ SETUP, press and hold VISUAL
EQ for more than 2 seconds.
The screen returus to normal mode.
• If you select OFF in step 1, then VISUAL EQ settings etc.
cannot be performed.