Operating instructions

English

System Description

In this system type, the woofer and tweeter are mounted close together on the dash-

board, rear deck, or other surface that presents an oblique angle to the listener. In the

particular case of center channel usage, customized mounting is almost always neces-

sary. It should be noted that since it is impossible to anticipate every conceivable instal-

lation style, some experimentation may be necessary beyond the recommended set-

tings. In rear deck or similar applications, the network tuning considers the best balance

between driver and passenger listening positions, so all distances and angles are refer-

enced to the nearest side.

System Type 3

• Type-3A is con-

sidered to be a

fairly close and

central location

with a sloping sur-

face, resulting in

an off-axis condi-

tion of both drivers

relative to the lis-

tener. Additionally,

due to the vertical

configuration, the

tweeter is the far-

thest of the two.

• Type-3B assumes

mounting on a flat

surface at some

distance, with both

drivers approxi-

mately equidistant

relative to the lis-

tening position.

The significant dif-

ference from Type-

3A is that the

pathlengths of

each driver are es-

sentially equal,

and the flat sur-

face presents a

more extreme lis-

tening angle.