Installation Guide

Jeep

SPV-65-JLT v20200731  5/6

5 Use supplied template and mark area of each side

for soundbar cutting.

6 With a reciprocating air saw or preferred cutting

device, carefully cut following markings from Step

5. Be carefull on cutting depth. Failure to do so will

result in cutting through the soundbar.

Rear Soundbar Speaker Removal & Installation (2018-Up)

7 Fill the right and left speaker cavities using (1) of

the supplied polyﬁl sheets per cavity.

8 Plug in the speaker. Use the supplied replacement

bolts (not the OEM 5mm allen heads) and mount the

speaker in the bar.