Owner's Manual

Jeep/Chrysler/Dodge
SGS-CH01 z 9/11
Dip Switch Settings
1234
ON
2007-2010 Jeep Wrangler JK- Remove power by unplugging the main connector to the SGS-CH01. To enable
static guidelines dip switch 1 must be DOWN (On position) and dip switches 2, 3, and 4 must be UP (Off
position).
2011-2018 Jeep Wrangler JK- All dip switches must remain UP (Off position). If any dip switches are in the
wrong position the interface will not function properly.
Product Usage (Active Guidelines)
1 Engage vehicle in reverse gear.
2 Reverse camera will turn on automatically.
3 The Active Guidelines will appear only after the steering wheel is turned and move according to the steering
wheel position.
4 After shifting out of reverse position the screen on the head unit will show it’s normal information.
10 Feet
2 Feet
0.6 Feet
Active
Guidelines
Static
Guidelines