Owner's Manual

Jeep/Chrysler/Dodge
SGS-CH01 z 6/11
SGS-CH01 Wiring Diagram: OEM Head Unit With KCX-C2600B (Sold Separately)
To Factory Main
Harness Connector
To Factory Harness
To SGS-CH01
Main Connector
IN OUT
SGS-CH01
Factory Head Unit
To Factory
Camera Connector
To Rear
Camera Input
CAM TRIG
To HCE-TCAM1-WRA
Connector
HCE-TCAM1-WRA*
(Sold Separately)
KCX-C2600B
(Sold Separately)
Reverse Out (Orange/Black)
Reverse In
(Orange/White)
Accessory (Red)
Battery (Yellow)
Ground (Black)
12 3 4 56
1 - V. Out
2 - Other Camera
3 - Front Camera
4 - Rear Camera
5 - Switch
6 - Power Wires
Alpine Direct Front Camera
Alpine Direct Rear Camera*
Toggle Switch
Splice these wires to the HCE-TCAM1-WRA (rear
camera) connector. Page 8 shows the connector pins.
Note the battery connection goes to the SGS-CH01 connector.
*Only one rear camera can be used for a total of 2 cameras (one front and one rear). The direct input will always take precedence over the RCA input.
The HCE-TCAM1-WRA must be plugged into the RCA input for “Other Camera”. A direct camera to RCA adapter will not work.
To Chassis Ground
To Red Pin 4
To Orange/White Pin 1
To Yellow Pin 1 of
SGS-CH01 Main Connector
Orange/Black