Owner's Manual

Jeep/Chrysler/Dodge
SGS-CH01 z 5/11
SGS-CH01 Wiring Diagram: OEM Head Unit With Aftermarket Camera
To Factory Main
Harness Connector
To Factory Harness
To SGS-CH01
Main Connector
IN OUT
SGS-CH01
Factory Head Unit
To Factory
Camera Connector
To Aftermarket
Rear Camera
CAM TRIG
Not used
+12V
To optional switch
(sold separately)
This will activate the camera
while the vehicle is not in reverse
with a +12V input. The illustration is
a standard rocker style switch
that should be able to be purchased
at most electronic supply stores.
Guidelines are not displayed when
manually triggered.
Cut
Ground And
Accessory Can
Be Used To Power
Aftermarket Camera.
See Page 8 for wire
colors and pins of
rear camera harness.
Please note to leave
enough space in case
the connector would
need to be soldered
back on for adding
the HCE-TCAM1-WRA.