Owner's Manual

Jeep/Chrysler/Dodge
SGS-CH01 z 2/11
Types of Precautions
Forbidden
Indicates actions that are
forbidden (must not be performed)
Forbidden
Indicates that disassembly is
forbidden.
Mandatory
Indicates actions that are
mandatory (must be performed)
Marks content that should receive
your full attention.
Warning
Do not disassemble or modify the product.
Doing so could lead to an accident, fire, or
electric shock.
Store screws and other small objects
where small children cannot reach them.
If one of these small objects is swal-
lowed, consult with a doctor immediately.
When replacing fuses, be sure to
use fuses with the specified current
rating. Failing to do so could lead to
an accident or fire.
Only connect the product to a 12 VDC
negative ground car. Failing to do so could
lead to an accident or fire.
Before you begin wiring, remove the
ground wire from the negative terminal of
the battery. Failing to do so could lead to
electric shock or injury.
Do not cut the insulation on a cord and take
power from another device. Doing so could
lead to fire or electric shock.
Do not install the product in a location
where it will obstruct the driver’s forward
view; interfere with the operation of the
steering wheel, gearshift, or the like; or
pose a threat to passengers. Doing so could
lead to an accident or injury.
When making a hole in the vehicle body, be
careful to avoid damaging pipes, the fuel
tank, electrical wiring, and the like. This
kind of damage could lead to an accident
or fire.
When installing and grounding the product,
do not use any of the bolts or nuts of the
steering wheel, brakes, fuel tank, or the
like. Doing so could make the brakes stop
working or lead to fire.
Do not install the product near the
passenger-side airbag. Doing so could
interfere with the operation of the airbag
and lead to an accident or injury.
Bundle cords so that they don’t interfere
with driving. Wrapping cords around the
steering wheel, gearshift, brake pedal,
or the like, could lead to an accident or
damage equipment.
Caution
Connect the product properly according to
the instructions. Failing to do so could lead
to fire or an accident.
Do not sandwich cords between the seat
railing or allow them to touch protrusions.
Resulting breaks or shorts could lead to
electric shock or fire.
Do not block vents or heat sinks. Doing so
could lead to fire or damage equipment.
Use the accessories according to the
instructions, and attach them securely.
Failing to do so could lead to an accident
or damage equipment.
Do not install the product where it may be
exposed to water or in a place with high
levels of humidity or dust. Doing so could
lead to fire or damage equipment.
The installation and wiring of this product
requires specialized skills and experience.
Have the product installed by an Alpine
authorized dealer.
Forbidden
Forbidden
Mandatory
Mandatory
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden