Owner's Manual

Jeep/Chrysler/Dodge
SGS-CH01 z 10/11
1234
ON
**NOTE: Make sure to set the Guidelines to be ON or OFF before putting the vehicle dash back together as this
option can only be changed from the OSD menu.
If any of the other parameters are selected and changed it will not change the parameter in the system.
Contrast........ 50
Brightness..... 50
Saturation...... 62
Position H...... 9
Position V....... 11
IR AV1............. DVR
IR AV2............. None
Guide-L.......... 60
Guide-R.......... 3
Guide-CNTRL.. ON
H-Size.............. 16
V-Size............... 16
Toggle between “ON’ & “OFF” to turn the
guidelines ON or OFF.
Not Used
Not Used
Using On-Screen Display (OSD) Interface To Turn Off Guidelines
1 Engage vehicle in reverse gear.
2 The 3 buttons on the side of the module are used to make selections with the On-Screen Display. Press the
“Menu” button to bring up the OSD illustrated below.
3 Press the “Menu” button again to navigate down to the “Guide-CNTRL” option. After scrolling through the final
selection the OSD will close.
5 Toggle the function on or off using the “Up” and “Down” keys. Select the preference accordingly.
6 Press the “Menu” button to scroll through the rest of the options until the OSD menu disappears from the
screen. Disengage the reverse gear, then put the vehicle back in reverse to make sure the changes are
working.
Menu Down Up