Owner's Manual
Table Of Contents
- Power Amplifier Owner's Manual
- Contents
- Warning
- Servicw Care
- About the Protection Circuit
- Accessories
- Installation
- Attaching the Logo Plate
- Connections
- Connection Check List
- Switch Settings
- System Diagrams
- Basic Connection Diagram
- 4 Speaker + Subwoofer System
- 2 Speaker + Subwoofer System (Bridged Connections)
- Front 3-Way System
- Front 2-Way + Subwoofer System
- Front 3-Way + Subwoofer / 2 Amplifier System (Connection example with R-A75M)
- About Connecting to the Speaker Input Level System
- Important Tips on Bridging an Amplifier
- Cautions on Power Supply Wires
- Connection example when installing two amplifiers with a fuse capacity of 80 A and one amplifier with 90 A
- Specs
- Cautions on Power Supply Wires Connection
- Warranty
17-EN
Front 3-Way + Subwoofer / 2 Amplifier System (Connection example with
R-A75M)
When using the Front 3-Way + Subwoofer / 2 Amplifier System, set each switch as follows.
Input Channel
Selector Switch
(CHANNEL-3/4)
Input Channel
Selector Switch
(CHANNEL-5/6)
Crossover Mode
Selector Switch
(CHANNEL-1/2)
Crossover Mode
Selector Switch
(CHANNEL-3/4)
Crossover Mode
Selector Switch
(CHANNEL-5/6)
1/2
1/2
HP-H
BP
LP
R-A90S
[LO]
[LO]
Head Unit, etc.
R-A75M
Remote Turn-On Lead
Speaker Input Level Switch
Speaker Input Level Switch