Owner's Manual
Table Of Contents
- Quick Setup Guide
- Owners Manual (Supplied on CD-ROM)
- Table of Contents
- Features / Description
- Input Level Adjustment
- Setup CD
- Parts & Controls
- Wiring / Connections
- Before Setup
- Setup Procedure
- Setup Procedure Video
- Demo Mode
- Optional Settings
- Parametric Equalizer
- Parametric Equalizer Video
- Crossover settings
- Crossover Settings Video
- Time Correction
- Time Correction Video
- Mounting
- Adjustments / Ranges
- Specs
- System Examples
- Scans of Box
- Scan of CD-ROM
- Warranty
31
5. FRONT 1 is displayed. Use the q or p button to choose a channel. In this example
FRONT 2 is used. The following FRONT 2 adjustment procedures will be similar in
nature to adjustments for the other channels. To make adjustments to the other chan-
nels just substitute FRONT 1, REAR, or SUBWOOFER, for FRONT 2. The proce-
dure is the same with only the parameters slightly different, as shown at the end of this
section. User can also use the t button to return to the previous level with CROSS-
OVER or TIME DELAY selections.
6. Once the channel has been selected, Press ENTER to begin making the adjustment.
CROSSOvER SETTINGS
Return
Scroll Up
Scroll
Down