Owner's Manual
Table Of Contents
- Quick Setup Guide
- Owners Manual (Supplied on CD-ROM)
- Table of Contents
- Features / Description
- Input Level Adjustment
- Setup CD
- Parts & Controls
- Wiring / Connections
- Before Setup
- Setup Procedure
- Setup Procedure Video
- Demo Mode
- Optional Settings
- Parametric Equalizer
- Parametric Equalizer Video
- Crossover settings
- Crossover Settings Video
- Time Correction
- Time Correction Video
- Mounting
- Adjustments / Ranges
- Specs
- System Examples
- Scans of Box
- Scan of CD-ROM
- Warranty
23
OPTIONAL SETTINGS
Introduction
The PXE-H660's automatic setup process is now complete. If you wish to further tune
the system's sound quality, follow the steps below. Each output of the PXE-H660 has a
3-Band, parametric equalizer, up to 10 ms of time correction and customizable crossover
points for High-pass, Low-pass and Subwoofer.
Follow the procedures below to customize the Parametric EQ, Time Delay and Crossover.
Use the same procedure described below, for each of the channels being modied. Pressing
"ENTER" gets you into the program screen mode, allowing changes to current values. Use
"SAVE SETTINGS" to permanently store these changes into non-volatile memory.
PARAmETRIC EQUALIZER
The Equalizer uses 3 Bands for each of the 7 channels to customize the tone of the music.
Each Source Input to the PXE-H660 has its own EQ. Each of the Bands (Bass, Mid and
Treble) is adjusted in a similar manner. The following steps use the Bass Band as an ex-
ample. Use the same steps to make changes to the Mid and Treble Bands as well.
Equalizer
1. Press MODE twice to enter Custom tuning.
2. Press u to get "PRESET 1" in the display.