Owner's Manual
Table Of Contents
- Quick Setup Guide
- Owners Manual (Supplied on CD-ROM)
- Table of Contents
- Features / Description
- Input Level Adjustment
- Setup CD
- Parts & Controls
- Wiring / Connections
- Before Setup
- Setup Procedure
- Setup Procedure Video
- Demo Mode
- Optional Settings
- Parametric Equalizer
- Parametric Equalizer Video
- Crossover settings
- Crossover Settings Video
- Time Correction
- Time Correction Video
- Mounting
- Adjustments / Ranges
- Specs
- System Examples
- Scans of Box
- Scan of CD-ROM
- Warranty
19
16. "PUT MIC POS3 PRESS C"
Reposition the microphone to position 3 in the vehicle. When ready, exit the vehicle.
Press "C" on the remote control to continue. The MultEQ LED will be illuminated
steady green while measuring position 3. When the MultEQ LED starts to blink
slowly again, Position 3 measurement is complete; continue to the next step.
Continue this process for the 4th MIC position. Four calibrated positions are required
for proper MultEQ response.
SETUP PROCEDURE