Owner's Manual

Jeep
Wrangler Unlimited  6/10
Factory Unit Disassembly Process
1 Remove the rubber cover from the top center
storage area and extract (1) 7mm screw.
2 Remove the knee cover panel and extract (2) 7mm
screws located to the right and left sides of the
steering wheel column.
Right side of
steering wheel
column.
Left side of
steering wheel
column.
3 Remove the window switch pod using a panel
removing tool and extract (1) 7mm screw.
4 Remove the dash panel.
5 Extract (4) 7 mm screws and remove the factory
radio.