Owner's Manual

Toyota Corolla
 6/11
Factory Equipment Removal Process (continued)
7 Remove (4) 14mm screws from the passenger side
seat.
8 Tilt the passenger seat towards the back to reveal
(4) connectors. Disconnect and remove the seat.
Installation
1 Connect the power cable to the Positive (+) battery
terminal in engine compartment and route the cable
towards the passenger side as shown below. Note:
The negative terminal should remain disconnected
unit the installation is completed.
3 Mount the Subwoofer level remote under the
cigarette lighter panel with the provided hook and
loop adhesive tape and route the cable to the
passenger side seat.
2 Route the power cable thru the rubber grommet on
the passenger side firewall.
4 Connect the power cable to the main harness.