Owner's Manual

Installation (continued)
7 Locate the Active Noise Cancelling module behind
the passenger side vent and disconnect it. Note:
skipping this step will cause the subwoofer to
emit unwanted engine rumble.
Disconnect
Active Noise Cancelling
Module
9 Make all necessary connections at the radio
location according to the OEM or Aftermarket
system diagrams on pages 9, 10 or 11. Note: be
sure to set the recommended audio settings.
Shown with OEM T-harness adapter
11 Replace all removed components and re-connect
the Negative(-) battery terminal.
8 Route the main harness along the side on the
center console to the radio location.
Ll u \Ll
"',,.
,',
....
'
~'
----
10 Connect the main harness to the amplifier/
subwoofer assembly and align it to the seat
mounting points.