Owner's Manual

Installation
Wiring Diagram With IVA-Dl 05
Dimmer In (Illumination) ( ... )
11111111_~~~~~(W:;;;;;hit;;:":;;B~lue) :~~:71:~~7~~ation
To protect against vehicle noise, leave a
space of 10 to 20 em between the vehicle
wiring and wiring for the Docking Adapter
when installing.
The Docking Adapter should be mounted
in a convenient location using the mounting
screws provided.
I
ToAUX :
inputof I
IVA-0105 :
Ground (Black)
flllJl ACe (Ignition) (Red)
(2A)
Interrupt (PinkiSkyblue)
Battery
lead
(Yellow)
(2A}
Connect to a metal part
of chassis body with
screw
To the
Acc power lead (+)
Connect this to the !NT (-)
input of the head unit. Do
not connect for 2006 and
older
head unit
To Constant 12 V (+)
Open
n
1 ~~o~~I:~:::::~"~':::)(R"'d:::-) -----1
Interrupt (Pink/Blue)
0","
9 Parking Brake (Yellow/Blue)
10
Open
~I Power Connector Pin
l1QI]]]]lJ]Jl Configuration
L
Parking Brake (Yellow/Blue) To the parking brake
signal line (-)
Open
Batlery(Yellow)
Dimmer In (Illumination) (White/Blue)
GPS Antenna
(Included)
,
,
: : : :
I 1 I I
I I I I
4. MICROPHONE
External microphone (included) input
6. GPS ANTENNA
3. AUDIO OUTPUT
Connects to aux input of Alpine Multimedia Station (RCA
not included).
GPS antenna is located on the connector to the Blackbird
S. POWER
Connects 10 pin power input harness.
1. ANTENNA iNPUT (OPTIONAL)
FM antenna input (RDS-TMC traffic tuner reception).
Optional film antenna
(KAE-3S0FM) available. See your
dealer for details.
2. DISPLAY (RGB Output)
Connects to the display connector of Alpine Multimedia
Station.
5
43
Connections
Operating Blackbird from the
Multimedia Station (using IVA-
Dl 05 as an example)
1. Connect Blackbird to the Docking Adapter,
with Blackbird turned off.
2. Power on the Multimedia Station and select
Navigation as Source.
To Listen to Music from Blackbird
3. Press SOURCE and select AUX as input.
4. Press V.SEL and select Navigation as video
source.
• UsingV, SEl, you can still use functions of the Multimedia
Station while Blackbird is on the screen.
• Blackbird's music feature
is also available from the Navi
menu.
See Blackbird Owner's Manual for more details.
Note: Please ensure your Blackbird is turned OFF before
connecting to the docking adapter. In the event navigation
does
not display on the Multimedia Station screen, please
reset
the Blackbird.
Specifications
External dimensions ...
............ 138(w) x 30 (h) x 70 Id) mm
Weight..................... . 0.8 Lb I 360 g)
Included in the box:
PMD-DOK2 Docking Adapter ,
10
pin Power harness IS m/16.4 It) 1
13
pin RGB Video cable IS m/ 16.4 It) 1
External GPS antenna (5 m/ 16.4 It) .. 1
External
Microphone (3m/10 It) ,
Mounting screws 4
Installation/Owner's Manual 1
Registration card 1
Product specifications and appearance are
subject to change without notice for the
purpose of improvement.
Features
Navigation map display output to
Multimedia Station
Full Touch Control
with compatible
Multimedia Station
Voice guidance output
Stereo MP3IWMA audio output
Confirming Proper Installation
The vehicle connections screen allows you to
ensure proper installation of PMD-DOK2.
1. Touch NAVI. The Multimedia Station will
display the Blackbird screen.
2. Touch MAIN MENU ~.
3. Touch INFORMATION".
4. Select VEHICLE CONNECTIONS. The
connection status will appear on the screen.
Illumination
~ Toggle the parking lamp switch on and off
to confirm this connection.This will allow the navigation
display
to change between night and day mode.
Parking Brake -Toggle the parking brake on and
off to
confirm this connection. This will allow access to the
Edit and Setup menu while
the vehicle is parked.
Additional On-Screen Buttons
When Blackbird is docked, two additional
on~screen buttons allow you to conveniently
access system features.
EJI Touching this button will give you access
to the Multimedia Station's display
control .
Note: If left idle for more than 5 seconds, the system will
automatically return to the Blackbird navigation screen.
_
Touching this button will display the
Blackbird's music screen. Refer to the
Blackbird Owner's Manual for help using
the music functions.
In Case of Difficulty
If you encounter a problem, please turn the power
off, then on again.
If the unit is still not functioning
normally, please review the items in the following
checklist. This guide will help you isolate the
problem. Otherwise, make sure the rest
of your
system
is properly connected, or consult your
authorized Alpine dealer.
No function or display.
Blown fuse.
- Check
the fuse on the battery and ACC lead of
the dock; replace with the proper value fuse (2 A
blade fuse)
if necessary.
Touch screen not working.
Monitor is not touch panel enabled.
- The
touch screen feature will work only with an
Alpine touch panel monitor.
Connection failure
- In some vehicles,
it may be necessary to connect
the Multimedia Station's remote turn-on lead
(blue/white) to the ignition lead of the dock.
Not supported
- The docking adapter does not support PMD-
Bl00 or PMD-B100T. For those unit, please use
PMD-DOK1.
No GPS signal.
GPS antenna not connected.
- Connect the provided GPS antenna, for best
reception, ensure
that it has a good open view
to the sky and make sure the antenna is not
covered (obstructed) by any metallic surface or
object.
Cannot access certain functions.
Certain functions are disabled while driving.
- Certain menu and functions are disabled while
driving. Pull over and engage the parking brake
to enable these features.
Certain
functions are disabled in docking mode.
- Remove the Blackbird from the dock, and power
it on in the cradle or in stand alone mode to
enable these functions.
Unable to receive traffic information
Subscription not enabled or expired.
- Traffic service can be
activated at
http;//www.blackbirdtraffic.com
Antenna disabled.
-
If using a stock antenna with an active splitter
system, it might be necessary to use the
Multimedia Station's remote turn-on lead (blue/
white) instead of the power antenna out wire to
continuously activate the power antenna and/or
antenna booster.
No
antenna
- Make sure an FM antenna is properly connected;
replace the antenna or cable if necessary.
No
traffic information in the area
-
As of October 2006, traffic information is
available in SO markets in the US and Canada.
Please check
the coverage maps at
http://www.blackbirdtraffic.com
to see if you are in a coverage area.
Bluetooth Handsfree is not working
Int icon pops up whenever there is a call
- Please
go into the Setup Menu of your Alpine
Multimedia Station. In System Setup, change
Bluetooth setting to NAV. For 2006 and older
headunit without a Bluetooth setting, DO NOT
connect the Interrupt wire.
No
Audio can be heard during a call
- Please make sure
the Docking Adapter is
connected to the Aux input of your Alpine
Multimedia Station. For 2006 and older headunit,
make sure to select Aux as source,
and answer
with your phone.
P/NW05G0232