Owner`s manual

PMD-B200P Version 2.0 Owner’s Manual
23
6.5 Alpine Navigation Software concepts
6.5.1 Auto Zoom
Auto Zoom provides much more than just a usual automatic zoom feature:
• Whi
le following a route calculated by Alpine Navigation Software: when approaching a
turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the
next junction. If the next turn is at a distance, it will zoom out and lower the view angle to be flat
so you can see the road in front of you.
• While driving without an active route in Alpine Navigation Software: Auto Zoom will zoom
in if you drive slowly and zoom out when you drive at high speed.
6.5.2 Position markers
6.5.2.1 Current GPS position and Lock-on-Road
When your GPS position is available, Alpine Navigation Software marks your current position with the
icon on the map.
The exact location of the position marker depends on the vehicle type used for route calculation. The
vehicle type can be selected in Route settings (page 64).
• If you choose pedestrian: The
icon is at your exact GPS position. The direction of the
icon shows your actual heading.
• If you choose any of the vehicles: The icon may not show your exact GPS position and
heading. If roads are near, it is aligned to the nearest road to suppress GPS position errors,
and the direction of the icon is aligned to the direction of the road.
6.5.2.2 Returning to normal navigation
When GPS position is available, and you have moved the map (the icon is moving or is not
even visible), or you have rotated the map in 3D or rotated 2D mode, tap to move the map back
to the GPS position and re-enable automatic map rotation.
Note!
Even if you move the map while you are driving, Alpine Navigation Software continues
navigating if there is an active route: it plays the voice instructions and displays the
turn
preview icon according to your current GPS position.
130.com.ua
Autogood products internet store http://130.com.ua