Datasheet

PMD-B200P Version 2.0 Owner’s Manual
55
8.1.6 TMC Events screen
This function is not available in Handheld mode.
You can access the list of TMC events, and select or ignore specific radio stations in the list of Traffic
events. Tap the Traffic button on the Map screen.
The colour of the Traffic button show the Traffic status:
Colour Description
There are no new (unread) Traffic events in the list.
There are new Traffic events but they are not concerning your recommended route.
There are Traffic events on your route.
They were handled, but it is better to take
the concerned road segments rather then to avoid them.
Manual Traffic handling is selected in Settings, and there are Traffic events
on your
route to be handled.
When you tap the button, the list of current TMC events is displayed first, ordered by their distance
from your current position. You can change the content of the list:
Button Description
All All TMC events
received by Alpine Navigation Software appear in the
list.
On Route
Only TMC events concerning a part of your active route
appear in the
list.
To check the currently received FM radio station, to exclude radio stations or to manually tune to a
radio station, tap
:
Button Description
Use Auto-tuner If Auto-tuner is enabled, the tuner of Alpine Navigat
ion Software
sweeps through the FM CCIR radio band searching for a TMC signal.
The first station with TMC data will be used automatically.
When no
TMC signal is available, the tuner keeps on searching. Turn off Auto-
tuner to select a radio station manually.
,
When Auto-tuner is turned off, search for the desired radio station
manually with these buttons.
Exclude This Station
Push this button to put the currently received FM radio station
on an
exception list, and make Alpine Navigation Software search for
another station instead.
Show Excluded Stations This button opens the list of radio stations previously excluded.
You
can re-enable any or all of the excluded stations.