User Guide

6 -EN
Adjusting Picture
Brightness, color, tint, contrast and sharpness can be
adjustable.
• Each source can be adjustable individually.
• Adjusting should be made within 10 seconds, otherwise
OSD (On Screen Display) will be automatically turned
off.
• When the adjustment is made, “FLAT” setting in Visual
EQ changes to “CUSTOM”. After reset, “CUSTOM”
changes back to “FLAT”
1 Press and hold the SELECT button for at
least 2 seconds to open SETUP screen. Make
sure the PICTURE display mode is selected.
SELECT
Front Panel Controls
SELECT
Remote Control
Adjusting Brightness
2 Press S or Tand select BRIGHT.
3 Press or to adjust the brightness.
Brightness can be adjusted from –15 (MIN) to
+15 (MAX).
4 Press the ENT button to finish adjustments
or wait 10 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting Color Density
2 Press S or Tand select COLOR.
3 Press or to adjust the color density.
Change depth can be adjusted from –15 (MIN)
to +15 (MAX).
4 Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting Tint
2 Press S or Tand select TINT.
3 Press or to adjust the tint. Tint tone can
be adjusted from G15 (G MAX) to R15 (R
MAX).
4 Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting Contrast
2 Press S or Tand select CONTRAST.
3 Press or to adjust the contrast. Contrast
can be adjusted from –15 (LOW) to +15
(HIGH).
4 Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
PKG-850P_EN.indd 6 07.12.2006 11:57:44 Uhr