User Guide

9 -EN
System Setup Operation
IR transmitter, source names and Audio levels can be
adjusted for all available sources.
• Once this adjustment is made, all sources are affected.
SELECT ENT
Front Panel Controls
ENT
SELECT
Remote Control
1 Press and hold SELECT for at least 2
seconds to show the SETUP menu.
2 Press SELECT twice to switch to SYSTEM
screen.
3 Press S or Tto change each mode
IR TRANS:
Press
and to select A/B/OFF. (Default: A)
SOURCE NAME 1:
Press
and to select AUX1/DVD/DVD-HU/
DVB-T/TV/GAME/USER (Default: DVD)
SOURCE NAME 2:
Press
and to select AUX2/DVD/DVD-HU/
DVB-T/TV/GAME/USER/OFF* (Default: DVB-T)
* When OFF is selected, source selection skips to
WKHQH[WLQSXW$8;FDQQRWEHWXUQHG2))
AUDIO LEVEL 1 (Setting for Aux1):
Press
and to select HIGH/MID/LOW. (Default:
HIGH)
AUDIO LEVEL 2 (Setting for Aux2):
Press
and to select HIGH/MID/LOW. (Default:
HIGH)
FACTORY DEFAULT:
Press ENT Key, the system changes to Factory
Default System Setting. Entire settings including
Picture, Visual EQ, Display Mode are also reset.
Customizing Source Name
<RXUGHVLUHG26'VRXUFHQDPHFDQEHGH¿QHGXSWR
characters.
4 Press and to select USER.
5 Press ENT key. Character setting menu
appears.
6 Press ST and ENT key to select the
characters “A-Z”, “0-9”, “-”, space and “.”.
“DEL”: Delete one character at a time.
“CLR”: Clear entire characters.
“OK”: Confirm source name and exit
from character setting menu.
 7KLVVHWWLQJZLOOQRWGLVDSSHDUXQWLOVHOHFWLQJ2.WRH[LW
the screen.
PKG-850P_EN.indd 9 07.12.2006 11:57:49 Uhr