User Guide

10
POWERGPSDISP.
EX-2EX-1
ANT.
12345
678910
(5A)
(5A)
A
A
1
6
5
10
VOLUME
MUTE
SOURCE
CVA-1000R
SET UPV.SEL
SYSTEM CONTROL
MONITOR / RECEIVER 35Wx4
TFT COLOR LCD
FUNC
R D S
EON
SYSTEM CONTROL
MONITOR / RECEIVER
CVA-1000R
DISPLAY OUTPUT
Ai-NET
VIDEO OUTPUT
AUX1
AUX1
POWER SUPPLY
3-4. NVE-N099P Wiring Diagram With CVA-1000R/
TME-M006SP/TME-M005P
Power Connector
Pin Configuration
*
1
Improper connection of the
speed pulse line may cause
important safety features of the
vehicle to fail (such as the
brakes or air bags). Such
failures may result in an
accident and loss of life. We
strongly recommend that the
installation be performed by a
trained, authorized Alpine
dealer.
*
2
For further details about the
installation of the TMC antenna,
refer to “6. Installing TMC
antenna.”(page 13)
*
3
When the TME-M006SP/TME-
M005P is connected, this lead is
not used.
System expansion ports
1
2
3
4
5
6
7
8
9
10
Ground (Black)
ACC (Ignition) (Red)
Mute (Pink/Skyblue)
Open
Open
Battery (Yellow)
Dimmer In (Illumination) (White/Blue)
Speed Sensor (Green/White)
Parking Brake (Yellow/Blue)
Reverse (Orange/White)
Optional KCE-030N
RCA to 13-Pin DIN
Adaptor
Blue
(Modulator Control)
White/Brown
(Remote Output)
White/Green
(Guide Control Input)
Yellow/Red
(Display Control Input)
Yellow/Blue
(Parking Brake Input)
White/Blue
(Dimmer)
Red
(Ignition)
Yellow
(Battery)
Black
(Ground)
(Yellow) (Yellow)
(White)
(White)
(White/Brown)
(White/Green)
(Yellow/Red)
(White/Brown)
(White/Green)
(Yellow/Red)
Extension Cables
Included
Battery Lead (Yellow)
ACC (Ignition) (Red)
Ground (Black)
Dimmer In (Illumination) (+) (White/Blue)
Parking Brake (Yellow/Blue)
Reverse (+) (Orange/White)
Mute (Pink/Skyblue)
GPS Aerial (Included)
BATTERY
Connect to a metal
part of classis
body with screw
To the parking brake
signal line
To the vehicle speed
pulse line
Use this to connect
a device having the
IN-INT function (-)
output for Audio Mute
To the Illumination
signal line
To the Acc power lead
To reverse lights
(+12V signal)
*
1
Speed Sensor (Green/White)
Connect to VSS (Digital or Analog 0V - 3V)
Not Connected
*
3
*
3
TMC Antenna (Included)*
2
Attach to a bare metal chassis
part of your vehicle.