Owner`s manual

79-EN
Operating Mobile Digital TV Receiver
(DVB-T)
To operate the Mobile Digital TV Receiver (DVB-T) (Optional), set
“Setting the Rear AUX Primary” (page 110) to “DVB-T”.
1 Press <MENU>.
The AUDIO/VISUAL selection screen is displayed.
2 Touch [DVB-T].
The display shows the DVB-T mode screen.
When you touch the screen in the DVB-T mode, the operation screen is
displayed. For details on how to operate, refer to the Owner’s Guide of
the connected Digital TV Receiver (DVB-T).
Mobile Digital TV Receiver (DVB-T) screen display
example 1/2
1 []
Switches the Channel number/ Favorite channel number
down.
2 [TUNE]
Switches between the Channel mode and the Favorite
channel mode.
3 []
Switches the Channel number / Favorite channel number
up.
4 [MENU]
Call up the menu screen.
5 [A/V]
Switches the source.
6 [EPG]
Call up the Electronic Programme Guide (EPG).
7 [SCAN]
Touch the switch to start the scan procedure.
8 [1/2]
Changes the operation screen.
Mobile Digital TV Receiver (DVB-T) screen display
example 2/2
9 [MENU CONT.]
Call up the menu operation mode.
0 []
The display mode changes. Call up the direct touch mode.
! [2/2]
Changes the operation screen.
Menu operation mode screen display example 2/2
@ [], [], [], []
Move menu cursor.
# [Enter]
Determines the selected item.
$ [Return]
Returns to the previous item/screen.
% [Control]
The display mode changes. Call up the main mode.
Changing to the Mobile Digital TV Receiver
(DVB-T) mode
About the DVB-T operation screen
1 2 3 4 5 6 7 8
0 !9
%
@
@
@
#
@
$