Owner`s manual

30-EN
Displaying the Destination Menu Screen
Navigation operation starts from searching for a location.
When you display a map of the destination, it is possible to set the route
or to view facility information on the way.
The Destination screen can be displayed in two ways.
1 Touch [ ].
The Destination screen is displayed.
1 Press <MENU>.
The NAVIGATION screen is displayed.
2 Touch [Destination].
The Destination screen is displayed.
You can search for a destination as follows.
Destination
• Address (see page 31)
• POI (Point of Interest) (see page 32)
• Intersection (see page 33)
• Nearest POI (see page 34)
• Postcode (see page 35)
• Coordinate (see page 35)
• Address book (see page 36)
• Last destination (see page 36)
Others
• Home (see page 37)
• Map scrolling and Map input (see page 37)
When you search for a location in another country (area), you should
change the search country (area). To change the country (area), use the
Country switch on the Destination search screen.
1 Touch the Country switch on the Search screen.
The country (area) selection screen appears.
• The display of the Country switch may differ, depending
on the country (area) selected.
2 Touch the desired country (area) to select, and then
touch [OK].
The location in the selected country (area) is searched.
Displaying from the Map screen
Displaying from the Navigation Menu
screen
Country selection operation
Country switch