Owner`s manual

25-EN
Changing the Map Scale
The map scale can be adjusted from 50 m (50 yards) to 200 km (120
miles).
Map scale
• For some locations, the map scale is automatically adjusted
according to the map data.
• You can change between kilometers or miles in setup, see page 94.
1 Change the map magnification ratio by touching
[ ] (zoom in) or [ ] (zoom out).
This changes rapidly by touching and holding either switch.
• The building outlines can be displayed on the map when map scale is
50 m (50 yards) or less.
• The POI icons can be displayed when map scale is 200 m (200 yards)
or less.
• POI Warning icons can be displayed on the map when map scale is
500 m (500 yards) or less.
• Custom POI icons can be displayed on the map when map scale is
200 m (200 yards) or less.
• The 3D map will automatically be switched to heading up.
Changing the Map Orientation
The map orientation can be set for either north up, or your current
direction heading up. A 3-dimensional map can also be displayed.
The icon in the lower left of the screen above the map scale icon
indicates the current orientation.
1 Touch the Compass icon.
Each time you touch the Compass icon, the direction of the
map changes.
North up ➝ Heading up ➝ 3D map ➝ North up
North up map
Heading up map
3D map
• The viewing angle for the 3D map can be adjusted. See “Adjusting
the 3D view angle” (page 100).
• When the 3D map is scrolled, it changes automatically to 2D map
(heading up).
Metric (km/m) Imperial (mile/yard)
200 km 120 miles
100 km 60 miles
50 km 30 miles
20 km 12 miles
10 km 6 miles
5 km 3 miles
2 km 1 miles
1 km 1/2 miles (800 yards)
500 m 500 yards
200 m 200 yards
100 m 100 yards
50 m 50 yards
Compass Icon