Owner`s manual

138-EN
iPod/iPhone Connection (sold separately)
Connect USB cable to an iPod/iPhone with KCU-451iV.
Remove the iPod/iPhone
Remove the iPod/iPhone from KCU-451iV.
• If sound is not output, or the iPod/iPhone is not recognized when the
iPod/iPhone is connected, remove the iPod/iPhone once, then
connect it again, or reset the iPod/iPhone.
• Before connecting the iPod/iPhone to this unit, set the EQ function of
iPod/iPhone to OFF.
• Do not leave the iPod/iPhone in a vehicle for a long time. Heat and
humidity may damage the iPod/iPhone and it may become unusable.
USB memory Connection (sold separately)
Connect the USB memory
Connect the USB memory to USB cable.
Remove USB memory
Pull out the USB memory squarely from the USB cable.
• When removing the USB memory, pull it out straight.
• If sound is not output or the USB memory is not recognized, even
when USB memory is connected, remove the USB memory once, then
connect it again.
KCU-451iV
USB cable
USB memory
USB cable
USB memory
USB cable
Note
The SD memory card is inserted into the left side of the system.
Usually, you do not need to take the SD memory card out. To take it
out, follow the instructions below.
1 Remove the cover of the SD memory card slot.
2 Push the SD memory card which is inserted.
The SD memory card is pushed out.
CAUTIONS
• Do not insert the SD memory card into another
device such as a computer. Doing so may cause
data corruption.
• Do not remove the SD memory card while INE-
S900R is being operated.
The screw is removed