Owner`s manual

112-EN
This function can help restrict the viewing of movies to children of
appropriate age levels only.
Setting item: Parental
1 Touch [Parental] in the DVD Setup screen.
The numeric keypad screen is displayed.
2 Touch the numeric keypad to input a 4-digit
password.
Input number are displayed as “*”.
3 Touch [OK] to memorize the number.
The Parental screen appears.
4 Touch the number to select the rating level (1 to 8).
Select “Off” to cancel the parental lock or if you do not want
to set a rating level. The smaller the number, the higher the
rating level.
5 Touch [OK] to memorize the level.
• When the settings are changed, old settings are overwritten. Make a
note of the current settings before making changes.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• Once set, this rating level remains in memory until changed. To
enable playback of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs accessible
to young children for whom you deem them inappropriate.
You can change the Passcode.
Setting item: Passcode
1 Touch [Passcode] in the DVD Setup screen.
The numeric keypad screen is displayed.
2 Touch the numeric keypad to input the current
passcode.
The numeric keypad screen is displayed.
3 Touch the input screen to enter a new 4-digit
passcode.
• Keep a note of the number somewhere safe in case you
should forget it.
4 Touch [OK] to memorize the passcode.
When you set to On, the system skips the Menu screen of the DVD
VIDEO and starts playback of the main content.
Setting item: Menu skip
Setting contents: On / Off (Initial setting)
1 Touch [Menu skip].
Every time you touch, the On/Off setting will be changed.
Setting item: DivX information
1 Touch [DivX information] in the DVD Setup screen.
The DivX
®
file registered code is displayed.
Setting the Rating Level (Parental Lock) Changing the Passcode
Changing the rating level temporarily
Some discs may request that you change the rating level set in the
default settings during playback. In this case, the message appears
on the monitor screen “Do you wish to change parental control
settings? [Yes] [No].”
If this screen appears, change the level as follows:
• To change parental level and play, touch [Yes].
When [Yes] is touched, the numeric keypad input screen is
displayed. Input the 4-digit password in “Setting the Rating
Level (Parental Lock)” you set, then touch [OK].
• To play without changing the parental level, touch
[No].
(When [No] is touched, playback will be at the parental level
set in “Setting the Rating Level (Parental Lock).”)
Setting the Menu skip function
Displaying DivX
®
Disc Information