Owner`s manual

Before Using This System

After the language is selected, im-

portant information (headed by

“Please be sure to read this!”) is

displayed with each language.

Switching the display on/off

(The display examples are shown when the SMART MAP PRO NVD-Z001 is used.)

With this system, when the display monitor is set in the navigation display mode or external input display

mode and the ignition key is turned to the ACC or ON positions, the opening screen will automatically appear.

When the system is used for the first

time, both the language selection

menu and CAUTION are displayed on

the same screen. Select (highlight)

the desired language by tilting the

joystick. Then press the ENTER

button.

1-1

After you have read this important

information, press the ENTER button.

The map screen is displayed.

With the map displayed, press the OFF

button to turn off the monitor.

If you press the POWER button, the opening screen is

displayed.

a If there is no disc in the navigation system, "Please insert map DVD ROM" is

displayed. For details on how to load the disc, see "Inserting the DVD-ROM" and

"Removing the DVD-ROM" on page 11.

a If the disc cannot be read, the "Unable to read data. Check if map DVD is correct."

message is displayed. Try reloading the disk and if the problem cannot be cured,

return to an authorized Alpine dealer.

a If the monitor is kept on with the engine off for an extended period of time, the

vehicle's battery may discharge.

a Operation varies depending upon the disc version in use. For details, refer to the

manual for the DVD ROM.

1-2

Tips