Owner`s manual

4-EN

ALPINE KTX-H100 68-12118Z61-A (EN)

• If an air-conditioner or heater is turned on, turn it off. Measurement should not be performed if air-conditioner

or heater noise is present.

Activate IMPRINT SOUND MANAGER installed on the PC, and then select PXA-H100.

• Strictly observe the Warnings and Cautions written by the manufacturers of your PC and peripheral equipment.

• We do not accept responsibility for data lost due to the incorrect operation of the IMPRINT SOUND

MANAGER. We recommend you to back-up your important data regularly.

Place the Measurement Microphone in the vehicle according to the IMPRINT SOUND

MANAGER on screen instructions. Start the measurement.

• Perform PC operation outside the vehicle.

• If an error occurs during calibration, refer to the “Message List” at the end of this manual to help resolve the

problem. Close the dialog box by double-clicking the OK button to exit the programme.

From the IMPRINT SOUND MANAGER screen, double-click the Area Selection to be

measured.

Follow the IMPRINT SOUND MANAGER on screen display for placement of the

calibration microphone.

Place the microphone in a vertical position, at ear level (a camera tripod is useful for

this purpose).

01ENKTX-H100.fm Page 4 Wednesday, November 28, 2007 10:10 AM