Owner`s manual

2-EN
ALPINE KTX-H100 68-12118Z61-A (EN)
Connections
Before calibrating MultEQ, all other system connections must be
complete and functional.
1 Install the IMPRINT compatible Alpine head unit (sold after November, 2007) and
PXA-H100 into the vehicle.
• Make the correct connection. For details, refer to the Owner's Manual of PXA-H100.
2 After completing all system connections, make sure that sound is output from all
speakers.
3 Connect the USB Cable and Microphone to the PXA-H100.
4 Connect the USB Cable to a USB port of your PC.
• Be sure the Imprint device is powered up before connecting the USB Cable to a PC. Failure to do so may result
in communication error and measurement may not be possible.
USB Cable
Ai-NET Cable
Head Unit with IMPRINT
Sound
Characteristics
Measurement
Microphone
*
*
*
* Refer the Owner’s Manual of the IMPRINT audio processor PXA-H100 (sold separately) to
connect the cable.
*
01ENKTX-H100.fm Page 2 Tuesday, December 4, 2007 4:05 PM