Owner`s manual

1-EN
ALPINE KTX-H100 68-12118Z61-A (EN)
Accessories
Installation
This Programme runs under Microsoft
®
Windows
®
XP Service Pack-2 only. Make sure that this operating system
is installed by referring to “System Properties” on your PC.
To use this programme, Microsoft.NET Framework 1.1 (or later) is required. If this application is not installed on
your PC, the application is automatically installed with the programme.
• Before installing, all active programmes must be stopped.
1 Insert the supplied CD-ROM into the CD-ROM drive. Run the setup.exe file in the
IMPRINT folder. Follow the installation instructions on the screen.
2 Run the USB_setup.exe file in the DRIVER folder. Follow the onscreen instructions to
complete the installation.
3 After completing the installation, restart your PC.
Caution before Installing
Install the IMPRINT SOUND MANAGER programme before connecting the PXA-H100 to your personal
computer. If the programme is installed when the PXA-H100 connected to the PC, the programme may
malfunction.
Operating System
Installing
CD-ROM USB Cable (5m) Sound Characteristics
Measurement Microphone (3m)
01ENKTX-H100.fm Page 1 Wednesday, November 28, 2007 10:10 AM