Owner's Manual
Table Of Contents
•
If
an air-conditioner
or
heater is turned on, turn it off. Measurement should not be performed
if
air-conditioner
or
heater noise is present.
3 Activate IMPRINT Sq,UND MANAGER installed
on
the PC, and then select
PXA·H100.
• Strictlv obsen'e the Warnings
and
Cautions written
by
the manufacturers
(~fyour
PC
and
peripheral equipment.
•
We
do not accept responsibility
for
data lost due to the incorrect operation
of
the
1M
PRINT
SOUND
MANAGER.
We
recommend you to back-up your important data regularly.
4 Place the Measurement Microphone
in
the vehicle according to the IMPRINT SOUND
MANAGER on screen instructions. Start the measurement.
• Pe/form PC operation outside the vehicle.
• Ilall error occurs during calibration. refer to the "Message List" at the end
of
this manual to help resolve the
problem. Close the dialog box by double-clicking the
OK
button to exit the programme.
5 From the IMPRINT SOUND MANAGER screen, double-click the Area Selection to be
measured.
6 Follow the IMPRINT SOUND MANAGER on screen display for placement of the
calibration microphone.
Place the microphone
in
a vertical position, at ear level (a camera tripod is useful for
this purpose).
4-EN