Owner's Manual

Connections
Before calibrating MultEQ, all other system connections must be
complete and functional.
1 Install the IMPRINT compatible Alpine head unit (sold after November, 2007) and
PXA-H100 into the vehicle.
• Make the correct connection. For details, refer to the Owner's Manual of PXA-H100.
.2 After completing all system connections, make sure that sound is output from all
speakers.
3 Connect the USB Cable and Microphone to the PXA-H100.
4 Connect the USB Cable to a USB port of your PC.
Head Unit with IMPRINT
Ai-NET Cable
Sound
Characteristics
Measurement
Microphone
• POWER • *
#'.'!Ii.i.
*
o 0
/W#/1LPINE
0
0
111-
.... to MlC
))) «(("
... TOHU
IMPRINT
~J
~".TOPC
USB Cable
* Refer the Owner's Manual of the IMPRINT audio processor PXA-H I 00 (sold separately) to
connect the cable.
• Be sure the Imprint device is powered up before connecting the USB Cable to a Pc. Failure to do so may result
in communication error and measurement may not he possible.
2-EN