Owner's Manual

15A
Wiring Harness Diagram
Liability Disclaimer
#TDØSNØBG@MFDRØHMØCDRHFMØ@MCØL@MTE@BSTQHMFØSG@SØL@XØNBBTQØVHSGØXNTQØRODBHÚBØUDGHBKDØHSØ
is important that you do not rely solely on vehicle information contained in this installation
manual, such as dash disassembly, wire harness, and codes. Such information should be
BNMÚQLDCØVHSGØSGDØUDGHBKDØL@MTE@BSTQDQØ KOHMDØ$KDBSQNMHBRØ(MBØ@MCØHSRØ@EÚKH@SDCØBNLO@MHDRØ
is not responsible for damage that may occur to you or your automobile during the installation
of the Perfect Fit Kit.
If you have any further questions, feel free to contact Alpine Tech Support at 1-800-NAV-HELP.
Audio
Video
Navigation
System
To Foot Brake (+) at
switch above pedal
To Steering
Remote Input
(Pigtail)
To Head Unit
Power Connector
Yellow/Black
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, CA 90501, U.S.A
Do not send products to this address.
Call the toll free number or visit the website to locate a service center.
10A
Blue/White
3NØ@ESDQL@QJDSØ@LOKHÚDQØ
remote turn on
1. Adding rear-view camera:
A) INE-Z928HD wire colors: Pin 2 - Green White, Pin 16 - Red, Pin 18 - White, Pin 20 -
Black
B) Perfect Fit wire colors: Pin 2 - Violet/White, Pin 18 - Blue/Yellow
C) Remove all pins from above diagram
D) Replace pins 2 & 18 from INE-Z928HD Camera Harness with pins from Perfect Fit
Harness
2. The interface comes pre-programmed for all of the vehicles factory SWC functions and does
not require programming.
Ø3GDØ+$#ØVHKKØÛ@RGØVGDMDUDQØ@ØTRDQØOQNFQ@LL@AKDØ26"ØATSSNMØHRØOQDRRDC
4
To Camera
Connector (Steering
Wheel Controls)
To Chime
Module
Aux In to factory
3.5mm Input
18 2
Perfect Fit Harness
20 18 16 2
INE-Z928HD Camera Harness
Green/Black
To GM Vehicle
Harness
Empty Port