Owner`s manual

10
3-2. NVE-N872A Wiring Diagram With
CVA-1014/CVA-1004/CVA-1003
Improper connection of the
speed pulse line may cause
important safety features of the
vehicle to fail (such as the
brakes or air bags). Such
failures may result in an
accident and loss of life. We
strongly recommend that the
installation be performed by a
trained, authorized Alpine
dealer.
Power Connector Pin
Configuration
1
2
3
4
5
6
7
8
9
10
Ground (Black)
ACC (Ignition) (Red)
Mute (Pink/Skyblue)
Open
Open
Battery (Yellow)
Dimmer In (Illumination) (White/Blue)
Speed Sensor (Green/White)
Parking Brake (Yellow/Blue)
Reverse (Orange/White)
Battery Lead (Yellow)
ACC (Ignition) (Red)
Ground (Black)
Dimmer In (Illumination) (+) (White/Blue)
Parking Brake (Yellow/Blue)
Reverse (+) (Orange/White)
Mute (Pink/Skyblue)
Connect to a metal
part of chassis
body with screw
To the parking brake
signal line
To the vehicle speed
pulse line
Use this to connect
a device having the
IN-INT function (-)
output for Audio Mute
To the Illumination
signal line
To the Acc power lead
To reverse lights
(+12V signal)
Speed Sensor (Green/White)
Connect to VSS (Digital or Analog 0V - 3V)
POWER
GPS
ANTENNA
MIC/SW DISPLAY EX-2EX-3 EX-1
12345
678910
(10A)
A
A
1
6
5
10
Use for future system expansion
13P RGB Extension Cable Included
GPS Antenna (Included)
XM Data Receiver HCE-100XM
(Sold Separately)
Microphone for voice recognition/
Speak button for voice recognition
(Included)
BATTERY