Owner`s manual

20-EN
01GB07TMEM860.fm
ALPINE TME-M860 68-04123Z81-B (EN)
Remote Control Output Lead (AUX 1) (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Output Lead (AUX 2) (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Output Lead (AUX 3) (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panel-
compatible product.
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the TME-M860.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car’s reverse lamp that lights when the
transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Audio input Terminals (AUX 1)
Use these terminals to input the audio signals from a DVD
player, video deck etc.
Video input Terminal (AUX 1)
Use this terminal to input the video signals from a DVD
player, video deck etc.
Video input terminal for a rear view back-up camera
Use this terminal to input the video signals from a rear view
camera.
Audio input Terminals (AUX 2)
Use these terminals to input the audio signals from a DVD
player, video deck etc.
Video input Terminal (AUX 2)
Use this terminal to input the video signals from a DVD
player, video deck etc.
S Video input Terminal (AUX 3/ S-VIDEO)
Use this terminal to input the S-video signals.
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
Headphone
Video output Terminal
Use this terminal to output video signals to a rear monitor,
etc.
Audio output Terminals
Use these terminals to output audio signals to a rear
monitor, etc.
Main monitor
Fuse Holder (7.5A)
Power Supply Connector
Display Output Terminal
01GB00TMEM860.book Page 20 Wednesday, February 22, 2006 11:30 AM
130.com.ua
Autogood products internet store http://130.com.ua