Owner`s manual

6-EN
01GB05TMEM860.fm
ALPINE TME-M860 68-04123Z81-B (EN)
Each time you touch [ ] or [ ], the mode is switched.
Setting item: DISPLAY MODE
Setting contents: WIDE / CINEMA / NORMAL
In WIDE mode, the monitor displays a normal picture wider to fit
in a wide-screen monitor by evenly stretching out the picture
horizontally.
In CINEMA mode, the monitor displays a normal picture by
stretching out the picture vertically. This mode is good for
displaying a cinema type picture at the 16 : 9 ratio.
In NORMAL mode, the monitor displays a normal picture at the
centre of the screen with a vertical black band at each side.
• In the Navigation mode, you can only set to WIDE.
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: DIMMER
Setting contents: HIGH / LOW / AUTO
Setting item : AUX OUT
Setting contents : LINK / NAV. / AUX-1 / AUX-2 / S-VIDEO
• NAV. is displayed when NAV. is set in “Setting the Navigation Mode”
(page 7).
• AUX-1/AUX-2/S-VIDEO are not displayed when they are set to OFF
in “External Input Name Setting” (page 7).
Setting item: SOUND OUT
Setting contents: OFF / MONITOR / HEADPHONES
• The audio interruption setting for the navigation system takes
precedence over the sound output from other audio sources (radio,
CD player, etc.) regardless of setting items.
* Note that sound will not be output unless the audio output settings
are appropriate.
• When the source name of AUX 2 and S-VIDEO terminals is set to the
DVD HU, the adjustment of the audio level is made with the head
unit. In this case, sound is not output through the built-in speakers or
headphones. To output sound through the built-in speakers or
headphones, set to REAR in “Setting the Install Position” (page 6).
• The audio output level of navigation interruption is equal to the
volume level of the navigation mode.
Setting item: BEEP
Setting contents: OFF / ON
When you install this unit in the rear seat and use the optional
headphones/built-in speakers, set to REAR in this setting. If you set to
FRONT, the volume level adjustment cannot be made when you use the
optional headphones/built-in speakers.
Setting item: INSTALL POSITION
Setting contents: FRONT/REAR
DISPLAY Mode
Setting the Brightness of the Backlighting
HIGH: Sets the brightness of the screen to the same
brightness that was set in DIMMER LEVEL HIGH in
“Adjusting the Level of Backlight” (page 7).
LOW: Sets the brightness of the screen to the same
brightness that was set in DIMMER LEVEL LOW in
“Adjusting the Level of Backlight” (page 7).
AUTO: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
Rear Monitor Select Function
LINK: Output the video/audio portion shown on the main
monitor, to the rear monitor.
NAV.: Output the navigation video/audio to the rear
monitor.
AUX-1: Output the AUX1 video/audio to the rear monitor.
AUX-2: Output the AUX2 video/audio to the rear monitor.
S-VIDEO: Output the S-VIDEO video to the rear monitor.
Change Sound Output
OFF: Sound is not output.
MONITOR: Outputs sound through the built-in speakers.
HEADPHONES: Outputs sound to headphones if connected.
Sound (Beep) Guide Function
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide
beep will not be produced when a button on the unit is
pressed.
Setting the Install Position
FRONT: When installing this unit in the front seat
REAR: When installing this unit in the rear seat
01GB00TMEM860.book Page 6 Wednesday, February 22, 2006 11:30 AM
130.com.ua
Autogood products internet store http://130.com.ua