01GB00IVAD800E.book Page 1 Monday, February 28, 2011 11:35 AM ENGLISH Contents Operating Instructions WARNING WARNING ................................................. 5 CAUTION .................................................. 5 PRECAUTIONS ........................................ 6 Discs Playable on This Unit ................... 7 Getting Started Accessory List ................................................ 11 Location of Controls ......................................
01GB00IVAD800E.book Page 2 Monday, February 28, 2011 11:35 AM Other Useful Features Adjusting the Audio ........................................ 26 Storing Settings in the Memory ...................... 29 Calling up the Preset Memory ........................ 29 Search Function .............................................. 29 Rear Selection Function .................................. 30 Switching Display Modes ............................... 30 Switching the Visual Source Only (Simultaneous Function) .....
01GB00IVAD800E.book Page 3 Monday, February 28, 2011 11:35 AM IMPRINT Operation (Optional) Changing MultEQ mode ................................ 45 Adjusting Sound Setting in Manual Mode ..... 45 Setting the MX Level (Media Xpander) ..... 45 Adjusting the Crossover Settings (X-Over) .................................................. 46 Adjusting the Time Correction (Time Correction) .................................... 47 Setting the Time Correction Unit (T.Corr Parameter) .................................
01GB00IVAD800E.book Page 4 Monday, February 28, 2011 11:35 AM TUE-T150DV Operation (Optional) Operating the TUE-T150DV (Optional) ........ 63 Changer (Optional) Controlling CD Changer (Optional) ............... 64 Multi-Changer Selection (Optional) ............... 64 USB Memory/Portable audio player (Optional) BANK Function .............................................. 65 Playback .......................................................... 65 Repeat Play ..................................................
01GB00IVAD800E.book Page 5 Monday, February 28, 2011 11:35 AM Operating Instructions WARNING USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock. WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
01GB00IVAD800E.book Page 6 Monday, February 28, 2011 11:35 AM PRECAUTIONS Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic. Temperature Be sure the temperature inside the vehicle is between +45°C (+113°F) and 0°C (+32°F) before turning your unit on.
01GB00IVAD800E.book Page 7 Monday, February 28, 2011 11:35 AM Discs Playable on This Unit Disc Accessories There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine DVD players.
01GB00IVAD800E.book Page 8 Monday, February 28, 2011 11:35 AM Discs that cannot be played Tips for making your own CDs DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA/ AAC files), photo CDs, etc. The IVA-D800E plays DVD Video, DVD Audio, Video CD, Audio CD, DivX® and has a built in MP3/WMA/AAC decoder. DualDisc This unit is not compatible with DualDisc. Using a DualDisc may cause unit malfunction, and may cause disc damage when the disc is inserted/ejected.
01GB00IVAD800E.book Page 9 Monday, February 28, 2011 11:35 AM Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs • This unit is compatible with discs recorded in the standard DVDVideo and DVD-VR (DVD-R/DVD-RW only) formats. • Note that discs not finalized (processed to enable to play on playback-only DVD players) cannot be played on this DVD player. • Some discs may not play back, depending on the recording device and disc format. • Discs or files utilizing copy protection, may not be playable.
01GB00IVAD800E.book Page 10 Monday, February 28, 2011 11:35 AM On Handling Portable audio player • The unit can control a Portable audio player with the USB interface. Playable audio file formats are MP3 and WMA. • Portable audio player function is not guaranteed. Use Portable audio player according to the terms of agreement. Read the Portable audio player Owner’s Manual thoroughly. • Avoid usage or storage in the following locations: Anywhere in the car exposed to direct sunlight or high temperatures.
01GB00IVAD800E.book Page 11 Monday, February 28, 2011 11:35 AM Getting Started Location of Controls Rotary encoder/MODE/MUTE Accessory List • • • • • • • • • • • • • Head unit ............................................................................1 Power Cable .......................................................................1 Pre OUT/AUX cable ............................................................1 Mounting Sleeve .................................................................
01GB00IVAD800E.book Page 12 Monday, February 28, 2011 11:35 AM Detaching and Attaching the Front Panel Detaching 1 2 3 Turn off the unit power. Press (Release) at the lower right side until the front panel pops out. Grasp the right side of the front panel and pull it out. Turning Power On or Off Some of this unit’s functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations.
01GB00IVAD800E.book Page 13 Monday, February 28, 2011 11:35 AM Moving the Monitor to be Flat When you want to operate some function on the car (air conditioner, etc.) which is hidden by the raised monitor, use this function. 1 When the monitor is open, press FLAT. Recalling the Source Here is an example explanation for the Radio mode display on how to recall a source. 1 . The SOURCE selection screen is displayed. The monitor moves to the flat position.
01GB00IVAD800E.book Page 14 Monday, February 28, 2011 11:35 AM Display example for FM Radio main screen Displaying the Numeric Keypad Input Screen The numeric keypad input screen is displayed when the DVD or Video CD mode is selected for searching a title or chapter, and also for entering a country code or password for the DVD setup item. 1 2 Touch [10KEY] on the main source screen. Touch the desired numeric key.
01GB00IVAD800E.book Page 15 Monday, February 28, 2011 11:35 AM Presetting Stations Manually Radio Display example for FM Radio main screen 1 2 3 Tune in a desired radio station you wish to store in the preset memory by manual or automatic seek tuning. Touch [P1/2] to change the function guide. Touch and hold any one of the preset buttons [P.SET1] through [P.SET6] for at least 2 seconds. The selected station is stored. 4 Repeat the procedure to store up to 5 other stations onto the same band.
01GB00IVAD800E.book Page 16 Monday, February 28, 2011 11:35 AM CD/MP3/WMA/AAC Display example for MP3/WMA/AAC main screen Fast forward : Touch and hold [ ]. To pause playback Touch [ / Touching [ ]. / ] again will resume playback. To eject the disc Press [Source] button: Refer to page 13 [ ] button: Refer to page 29 CD: Displays the Track text*1/Disc text*1. • If there is neither Track nor Disc name information, “NO TEXT” will be displayed.
01GB00IVAD800E.book Page 17 Monday, February 28, 2011 11:35 AM What is WMA? M.I.X. (Random Play) Touch [ WMA, or “Windows Media™ Audio,” is compressed audio data. WMA is similar to MP3 audio data and can achieve CD quality sound with small file sizes. ] during playback. The tracks (files) on the disc will be played back in a random sequence. To cancel M.I.X. play, touch [ ALL*1 CD: AAC is the abbreviation for “Advanced Audio Coding,” and is a basic format of audio compression used by MPEG2 or MPEG4.
01GB00IVAD800E.book Page 18 Monday, February 28, 2011 11:35 AM Producing MP3/WMA/AAC discs MP3/WMA/AAC files are prepared, then written to a CD-R or CD-RW (DVD-R/DVD-RW) using CD-R writing software. A disc can hold up to 4,096 files/256 folders (including Root Folders), and the maximum number of folders is 255. Playback may not be performed if a disc exceeds the limitations described above. Media supported The media that this device can play back are CD-ROMs, CD-Rs, CD-RWs, DVD-Rs and DVD-RWs.
01GB00IVAD800E.book Page 19 Monday, February 28, 2011 11:35 AM DVD/Video CD Playing a Disc Display example for DVD Video main screen IVA-D800E has a built-in DVD player. When an optional Alpine DVD/Video CD/CD player (or DVD changer) is connected to the IVA-D800E, you can control it from the IVA-D800E. (except some operations) WARNING It is dangerous for the driver to watch the TV/DVD/ Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.
01GB00IVAD800E.book Page 20 Monday, February 28, 2011 11:35 AM 1 Touch [Source] on the main source screen. The SOURCE selection screen is displayed. 2 Touch [Disc]. The display shows the DISC mode screen. Insert a disc with the label side facing up. The unit starts to play the disc. When an optional Alpine DVD player is connected: Insert a disc into the DVD/Video CD/CD player, the player starts playing.
01GB00IVAD800E.book Page 21 Monday, February 28, 2011 11:35 AM Numeric Keypad Input Operations Displaying the Menu Screen With a DVD having two or more menus, a menu screen will appear for the programs available, in addition to the main programs. Touch [MENU] on the DVD mode main screen. The menu screen appears. • To perform necessary operations, see “If a menu screen appears” on page 20. 1 Touch [Control] to display the operation keys.
01GB00IVAD800E.book Page 22 Monday, February 28, 2011 11:35 AM Stopping Playback (Pre Stop) Finding the Beginnings of Chapters/ Tracks/Files Press the stop button during playback to stop playback. That position is stored in the memory. 1 “Pre Stop” is displayed. 2 Touch [ / During playback, touch [ ] or [ ]. The chapter/track/file switches each time the button is touched, and playback of the selected chapter/track/file starts. Touch [ ] once during playback.
01GB00IVAD800E.book Page 23 Monday, February 28, 2011 11:35 AM Slow Motion Playback Repeat Playback 1 Use this function to play the disc’s titles, chapters or tracks etc., repeatedly. 2 When [ ] or [ ] is touched and held while in the pause mode, the 1/8th speed slow motion playback mode is set. When held in for 5 more seconds, the slow motion speed switches to 1/2 the normal speed. DVD Video 1 Touch [ ]. The repeat mode switches every time the button is touched.
01GB00IVAD800E.book Page 24 Monday, February 28, 2011 11:35 AM VOFF mode*1: The track is played repeatedly. Searching by Title/Group/Program/ Playlist/Folder Number The group is played repeatedly. The disc is played repeatedly. *1 When “VCAP” or “VOFF” is set in “Setting the DVD-Audio Playback Mode” (page 35). DVD-VR 1 Touch [ Use this function to easily find positions on the DVD using the DVD’s titles, Groups, Programs or Playlists. 1 Touch [P1/2]* while playback is stopped.
01GB00IVAD800E.book Page 25 Monday, February 28, 2011 11:35 AM Switching the Angle Video CDs or DVD-VR with multiplex audio 1 During playback, touch [P1/2]*2. The function guide changes. On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback. *2 Touch [P1/3] while playing a DVD-VR disc. 1 2 During playback, touch [P1/2]*. The function guide changes. The left and right channels will be output as shown, each time the button is touched.
01GB00IVAD800E.book Page 26 Monday, February 28, 2011 11:35 AM About DivX DivX® is a codec (software) program to compress moving images while maintaining image quality using a highly advanced compression ratio and operating speed. • Official DivX® Certified product • Plays all versions of DivX® video (including DivX® 5) with standard playback of DivX® media files • DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license.
01GB00IVAD800E.book Page 27 Monday, February 28, 2011 11:35 AM Display Example for Balance/Fader Screen Adjusting the Subwoofer Level When ON is set in “Subwoofer On and Off ”, the item is displayed. When an External Audio Processor is connected, the list is not displayed. 1 Touch the title bar of Subwoofer. The display change to the Subwoofer Adjusting screen. 2 Touch [ ] or [ ] of Level to adjust the subwoofer output.
01GB00IVAD800E.book Page 28 Monday, February 28, 2011 11:35 AM Setting the Media Xpander mode 3 1 Select ON or OFF of MX by touching [ ] or [ ] of Media Xpander. OFF: Turns off the MX effect of every music source. ON: Turns on the specified MX mode. 2 3 Repeat step 2 to set another speaker. By setting these values to make its sound reach the listening position at the same time as the sound of other speakers. When the Media Xpander is on, you can adjust the Media Xpander level.
01GB00IVAD800E.book Page 29 Monday, February 28, 2011 11:35 AM Adjusting the Level Touch [ ] or [ ] of Level to adjust the level of selected band. Adjustable level: –6 to +6 dB Setting the Bandwidth Touch [ ] or [ ] of Q to select the bandwidth. Adjustable bandwidth: 1, 2, 3, 4 3 To adjust another band, repeat step 2 and adjust all bands. • The frequency value range of the current band should be higher than the previous band’s setting value and lower than the next band’s setting value.
01GB00IVAD800E.book Page 30 Monday, February 28, 2011 11:35 AM Display Example for Search Screen 2 Touch [Rear]. Rear Select display appears. • This function cannot be used when “Setting the Picture/Sound Output” (page 44) is set to OFF in the System Setup. • If [Main] on the Rear Select screen is touched, the screen changes to the main source screen. 3 Select directly by touching [ ], and its track (or folder/file) is played back. is displayed if there is a hierarchical list.
01GB00IVAD800E.book Page 31 Monday, February 28, 2011 11:35 AM Switching the Visual Source Only (Simultaneous Function) You can watch the video portion of another source while listening to the current source. 1 DVD Setup Press VISUAL while the monitor is open. The VISUAL selection screen appears. 2 Setup DVD Setup Operation Touch desired visual source. The visual source is switched to the selected one. Cancelling the Simultaneous Function 1 2 Press VISUAL while the monitor is open.
01GB00IVAD800E.book Page 32 Monday, February 28, 2011 11:35 AM Setting of the Audio Language Set the audio language produced from the speakers. Setting item: Audio Language Setting contents: Auto / EN / JP / DE / ES / FR / IT / SE / RU / CN • When “Auto” is selected, the primary audio language among the recorded ones is played. Setting of the Subtitle Language Set the language of the subtitles displayed on the screen. The numeric keypad input screen closes when the area is touched while displayed.
01GB00IVAD800E.book Page 33 Monday, February 28, 2011 11:35 AM Setting the Rating Level (Parental Lock) Changing the Digital Output Setting This function can help restrict the viewing of movies to children of appropriate age levels only. Use the following procedure to set the digital audio signal output from the IVA-D800E. Setting item: Parental Setting content: Input Setting item: Digital Out Mode Setting contents: Auto / LPCM • When the settings are changed, the old settings are overwritten.
01GB00IVAD800E.book Page 34 Monday, February 28, 2011 11:35 AM Audio output/Optical digital audio output Disc Audio recording format Digital output setting (DVD SETUP) Optical digital audio output Analog audio output (Ai-NET, RCA output) Format Fs Q LPCM (CD-DA, DVD-V, DVD-A, DVD-VR) 44.1/176.4kHz 16/20/24bit AUTO or LPCM 44.1kHz, 16bit, LPCM 2ch (2ch Downmix)* OK 48/96/192kHz 16/20/24bit AUTO or LPCM 48kHz, 16bit, LPCM 2ch (2ch Downmix)* OK PPCM (DVD-A) 44.1/88.2/ 176.
01GB00IVAD800E.book Page 35 Monday, February 28, 2011 11:35 AM 16:9 WIDE: Select this when connected to a wide screen TV. This is the factory setting. Setting the Downmix Mode This function applies to Dolby Digital, DTS stream sound. Setting item: Downmix Mode Setting contents: Surround / Stereo Surround: Stereo: Surround compatible Downmix Stereo Downmix Setting the TV Screen Use the procedure described below to modify the output screen according to the type of TV monitor (rear monitor) being used.
01GB00IVAD800E.book Page 36 Monday, February 28, 2011 11:35 AM Playing MP3/WMA/AAC Data (File Play Mode) When using discs containing both audio data and MP3/WMA/AAC data. Source Setup Source Setup Operation Setting item: File Play Mode Setting content: CD / CMPM Plays only the audio data on discs containing both audio data and MP3/WMA/AAC data. CMPM: Plays only the MP3/WMA/AAC files on discs containing both audio data and MP3/WMA/AAC data.
01GB00IVAD800E.book Page 37 Monday, February 28, 2011 11:35 AM Display Setup Display Setup Operation Setting Automatic Opening/Closing of the Monitor Setting item: Open / Close Setting content: Manual / Full / Close Manual: The Parking Brake must be engaged to access the Display mode screen. Attempting to access this screen while driving will display the warning-Can’t operate while driving. The following steps 1 to 4 are common operations to each “Setting item” of Display Setup.
01GB00IVAD800E.book Page 38 Monday, February 28, 2011 11:35 AM Turn the Function Guide ON/OFF (Function Guide Fade) By setting to ON, the function guide will be hidden if no operation is performed for 5 seconds in Radio source, USB source, etc. To display the function guide, touch the screen slightly. Setting item: Function Guide Fade Setting contents: OFF/ON • In DVD play mode, etc. the function guide will be hidden if there is no operation for 5 seconds even if you set OFF.
01GB00IVAD800E.book Page 39 Monday, February 28, 2011 11:35 AM Selecting the Visual EQ Mode (Factory’s setting) You can select a mode suitable for the subject image. Setting item: Visual EQ Setting contents: OFF (FLAT) / Night M. / Soft / Sharp / Contrast / P-1 / P-2 OFF (FLAT): Initial Setting Night M.: Suitable for movies in which dark scenes frequently appear. Soft: Suitable for CGs and animated films. Sharp: Suitable for old movies where images are not clearly shown.
01GB00IVAD800E.book Page 40 Monday, February 28, 2011 11:35 AM General Setup General Setup Operation The Parking Brake must be engaged to access the General mode screen. Attempting to access this screen while driving will display the warning-Can’t operate while driving. The following steps 1 to 4 are common operations to each “Setting item” of General Setup. Refer to each section for details. 1 Touch [ ] on the main screen. The SETUP selection screen is displayed.
01GB00IVAD800E.book Page 41 Monday, February 28, 2011 11:35 AM Setting the Scroll System Setup Scroll display is available if CD text, folder name, file name or tag information is entered. Setting item: Auto Scroll Setting contents: OFF / ON OFF: Turns off the AUTO scroll mode. Scroll display is done once as a track is changed. ON: Turns on the AUTO scroll mode. Scroll display is repeated as long as the mode is turned on. • Song, artist and album name, etc. scrolls when an iPod/iPhone is connected.
01GB00IVAD800E.book Page 42 Monday, February 28, 2011 11:35 AM • The auxiliary device being connected must have an Interrupt wire with a negative trigger for this function to operate automatically. Otherwise, a separate switch needs to be added to switch it manually. • If Adapter is set in “Setting the BLUETOOTH Connection (BLUETOOTH IN)” (page 44), the IN Int. Mute setting item is not displayed. Setting the Rear Camera Signal Input The video input signal type can be chosen.
01GB00IVAD800E.book Page 43 Monday, February 28, 2011 11:35 AM Setting the Navigation Interruption With an Alpine navigation system connected to the IVA-D800E, the voice guidance of the navigation system will be mixed with the radio or CD play. Setting item: Nav. Mix Setting content: ON / OFF ON: The navigation interruption mode is on. OFF: The navigation interruption mode is turned off. See “Adjusting Nav. Mix Level” under “Adjusting the Audio” on page 27 to set the navigation interruption volume level.
01GB00IVAD800E.book Page 44 Monday, February 28, 2011 11:35 AM Setting the Picture/Sound Output Setting the AUX+ Level Outputs the picture/Sound of the source selected on the IVA-D800E connected to the rear monitor. After setting to ON in “Setting the AUX+ Mode”, this setting can be carried out. Setting item: AUX Out Setting content: ON / OFF Setting item: AUX+ Level Setting contents: Low / High The “Rear” item is displayed on the Source Selection screen.
01GB00IVAD800E.book Page 45 Monday, February 28, 2011 11:35 AM IMPRINT Operation (Optional) Alpine introduces IMPRINT - the world’s first technology that thoroughly eliminates in-car acoustic problems that normally degrade sound quality, which enables us to experience music the way the artist intended. When the IMPRINT audio processor (PXA-H100) (sold separately) is connected to this unit, MultEQ and the following sound adjustment can be performed.
01GB00IVAD800E.book Page 46 Monday, February 28, 2011 11:35 AM Adjusting the Crossover Settings (X-Over) Before performing the following procedures, refer to “About the Crossover” (page 50). 5 2.2ch (3WAY) System 2.2ch (3WAY) System / (L+R) Setting item : X-Over 1 L+R: 2 3 Setting contents: Low / Mid-L / Mid-H / High Touch [ ] or [ ] of X-Over to select L/R or L+R. L/R: Different adjustment values can be set for the left and right channels.
01GB00IVAD800E.book Page 47 Monday, February 28, 2011 11:35 AM Adjusting the Time Correction (Time Correction) Adjusting the Parametric Equalizer Curve (P-EQ) Before performing the following procedures, refer to “About Time Correction” (page 49). You can modify the Equalizer settings to create a response curve more appealing to your personal taste. 1 Touch the title bar of Time Correction. Setting item : P-EQ The Time Correction adjustment screen appears.
01GB00IVAD800E.book Page 48 Monday, February 28, 2011 11:35 AM Equalizer Presets (F-EQ) 10 typical equalizer settings are preset at the factory for a variety of musical source material. Setting contents: F-EQ 1 Touch the title bar of F-EQ. The F-EQ list screen appears. 2 Touch [ ] or [ ] of the desired type to set to ON.
01GB00IVAD800E.book Page 49 Monday, February 28, 2011 11:35 AM These values are the time correction values for the different speakers. Setting these values to make each sound reach the listening position at the same time as the sound of other speakers. About Time Correction The distance between the listener and the speakers in a car vary widely due to the complex speaker placement.
01GB00IVAD800E.book Page 50 Monday, February 28, 2011 11:35 AM Level adjusting Output frequency range (0 to –12 dB) About the Crossover Crossover (X-Over): This unit is equipped with an active crossover. The crossover limits the frequencies delivered to the outputs. Each channel is controlled independently. Thus, each speaker pair can be driven by the frequencies for which they have been optimally designed.
01GB00IVAD800E.book Page 51 Monday, February 28, 2011 11:35 AM External Audio Processor Operation (Optional) A compatible, external audio processor is operable from this unit when connected. Some audio processors may require a wired controller. The explanations below use the PXA-H700/PXA-H701 as an example. Refer to the operating instructions of the audio processor for more details. • The adjustments or settings performed on the connected audio processor cannot be operated properly from this unit.
01GB00IVAD800E.book Page 52 Monday, February 28, 2011 11:35 AM Set MX Mode of the External Audio Processor Before performing the operations below, set MX (Media Xpander) mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected. Setting item : Media Xpander 1 Select ON or OFF of MX by touching [ ] or [ ] of Media Xpander. OFF: Turns off the MX effect of every music source. ON: Turns on the specified MX mode. 2 Touch the title bar of Media Xpander after setting to ON.
01GB00IVAD800E.book Page 53 Monday, February 28, 2011 11:35 AM X-OVER Adjustment Concrete examples Calculating the time correction value for the front left speaker on the diagram below. Setting item: X-Over 1 Conditions: Distance between farthest speaker and listening position: 2.25 m (88-3/4") Distance between front left speaker and listening position: 0.5 m (20") Calculation: L = 2.25 m (88-3/4") – 0.5 m (20")= 1.75 m (68-3/4") Compensation time = 1.75 ÷ 343 x 1000 = 5.
01GB00IVAD800E.book Page 54 Monday, February 28, 2011 11:35 AM Phase Switching Setting item: Phase Switch the phase (0° or 180°) by touching [ ] or [ ] of the desired speaker. Graphic Equalizer Adjustments 2 Touch the title bar of P-EQ. The P-EQ list screen appears. 3 Touch the title bar of the desired speaker (channel). The P-EQ adjustment screen appears. 4 Adjust the P-EQ to your preference. Selecting the Band Touch [ ] or [ ] of Band to select the desired band.
01GB00IVAD800E.book Page 55 Monday, February 28, 2011 11:35 AM Setting of Dolby Digital Setting item: Multi Ch Setup Adjusting the acoustic image (Bi-Phantom) In most installations, the centre speaker must be placed directly between the front passenger and driver. Using this function, the centre channel information is distributed to the left and right speakers. This creates an acoustic image simulating a centre speaker directly in front of each listener.
01GB00IVAD800E.book Page 56 Monday, February 28, 2011 11:35 AM Adjusting the DVD Level The volume (signal level) for Dolby Digital, Dolby PL II, DTS and PCM modes can be set. • Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel of this unit while making this adjustment. The setting is cancelled if the Decode mode is switched.
01GB00IVAD800E.book Page 57 Monday, February 28, 2011 11:35 AM How to connect to a BLUETOOTH compatible device (Pairing) For details on the control from a BLUETOOTH compatible device, refer to the Owner’s Manual of the BLUETOOTH compatible device. 1 2 3 4 Set a BLUETOOTH connection from a BLUETOOTH compatible device. The PIN code (“0000”) is displayed on the unit. Input the PIN code (“0000”) in a BLUETOOTH compatible device.
01GB00IVAD800E.book Page 58 Monday, February 28, 2011 11:35 AM Displaying the phone service provider name Adjusting the volume for the microphone input Setting item : Service Provider You can emphasize or weaken the microphone input volume level. The service provider name of the connected BLUETOOTH compatible device will be displayed. If a BLUETOOTH compatible device is not connected, “ID UNSENT” will be displayed. • Depending on the character type some phone service provider name cannot be displayed.
01GB00IVAD800E.book Page 59 Monday, February 28, 2011 11:35 AM Answering a Call Call Switching Operation Incoming calls are announced by the received call ring tone and a displayed message (Caller name/PHONE No.). While making a call, this function allows you to initiate the transfer of the audio between the mobile phone and the speakers in the car. Touch [ While calling, touch [ ] to switch the call sound between the unit and mobile phone. ]. The call starts.
01GB00IVAD800E.book Page 60 Monday, February 28, 2011 11:35 AM Redialing a Number in Dialed Calls History Previously dialed telephone numbers are stored in dialed calls history. You can redial a number by searching from dialed calls history. Setting item: Dialed Calls Touch [Call] of the person name or the telephone number you want to call from the Dialed Calls list. The call is placed.
01GB00IVAD800E.book Page 61 Monday, February 28, 2011 11:35 AM • If the voice dial fails, the unit will return to normal mode in 30 seconds. • You can perform this operation only when a voice dial compatible mobile phone is connected. If the mobile phone is not compatible with the voice dial, “Failed” is displayed for 2 seconds. • The Voice Dial function performance depends on the recognition range of the mobile phone and mounting location of the microphone. Note when the microphone is mounted.
01GB00IVAD800E.book Page 62 Monday, February 28, 2011 11:35 AM Navigation System (Optional) Switching the Navigation Screen (Optional) If an optional Alpine Navigation System is connected to the IVA-D800E, the Navigation screen can be displayed on this unit. 1 Touch [Source] on the main screen. The source screen appears on the display. 2 Touch [Nav.]. The Navigation screen is displayed. The operation is possible with the supplied navigation remote control.
01GB00IVAD800E.book Page 63 Monday, February 28, 2011 11:35 AM TUE-T150DV Operation (Optional) Scanning Mode 1 Touch [P1/2]. The function guide appears. 2 Touch [SCAN] to start the auto scan procedure. • For detail, refer to the Owner’s Manual of the TUE-T150DV sold separately. Operating the TUE-T150DV (Optional) Operable when optional TUE-T150DV is connected. When DVB-T is selected in “Setting the AUX Mode” (page 43), the source is displayed in SOURCE selection screen.
01GB00IVAD800E.book Page 64 Monday, February 28, 2011 11:35 AM Changer (Optional) Controlling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer may be connected to the IVA-D800E if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of the IVA-D800E, the CD Changer will be controllable from the IVA-D800E. If you connect a changer compatible with MP3, you can play CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on the IVA-D800E.
01GB00IVAD800E.book Page 65 Monday, February 28, 2011 11:35 AM USB Memory/ Portable audio player (Optional) BANK No. BANK1 BANK2 BANK Function What is a Bank? A bank is a unit of up to 1,000 songs, which is stored in memory/ portable audio player. “Banking” refers to the grouping of songs available in USB Memory/portable audio player, in banks of 1,000 songs each. However, when a USB Memory is connected, 1BANK can store up to 1,000 songs under the following conditions.
01GB00IVAD800E.book Page 66 Monday, February 28, 2011 11:35 AM For example: Searching by Artist name The following example explains how an Artists search is performed. Another search mode can be used for the same operation, although the hierarchy differs. Repeat Play Only Repeat One is available for this mode. Repeat One: A single song is repeatedly played back. 1 Searching by artist name 1 Touch [P1/2]. The function guide is displayed. 2 Touch [ ]. • Touching [ 2 (off) (Repeat One) 3 ].
01GB00IVAD800E.book Page 67 Monday, February 28, 2011 11:35 AM Alphabet Skip Function Selecting Playlist/Artist/Album/Genre/ Composer The unit is provided with a alphabet skip function for effective searching. When you use this function in the search mode, you can quickly search an artist or a song, etc. Alphabet skip function: Pressing ALPHABET [ ] or [ ] will switch the lists* ordered by the initials. The lists are arranged alphabetically. e.g.
01GB00IVAD800E.book Page 68 Monday, February 28, 2011 11:35 AM iPod/iPhone (Optional) Playback 1 Touch [Source] on the main screen. The Source Selection screen is displayed. 2 Touch [iPod]. The display shows the iPod mode screen. Connecting an iPod/iPhone 3 An iPod/iPhone can be connected to this unit, by using the USB connection cable. When this unit is connected by using the cable, the controls on the iPod are not functional. Return to the beginning of the current song: Touch [ ].
01GB00IVAD800E.book Page 69 Monday, February 28, 2011 11:35 AM Searching by artist name 1 Touch [ ]. The search mode is activated, and the search list screen appears. • Touching and holding [ search mode. 2 ] for at least 2 seconds will return to last Direct Search Function The unit’s direct search function can be used to search for an album, song, etc., more efficiently. In Playlists/Artists/Albums/Songs/Genres/ Composers/Podcasts/Audiobooks mode, you can quickly target any song.
01GB00IVAD800E.book Page 70 Monday, February 28, 2011 11:35 AM Display example for Albums search screen Random Play Shuffle (M.I.X.) The Shuffle function of the iPod/iPhone is displayed as IVA-D800E. Shuffle ALL on the ALL: Shuffle ALL plays all songs in the iPod randomly. Any one song does not play back again until all songs have been played back. Shuffle Albums : Album shuffle playback plays back all songs in order, then randomly selects the next album.
01GB00IVAD800E.book Page 71 Monday, February 28, 2011 11:35 AM About Sub Display Display example for MP3/WMA/AAC/DivX® mode Display example for Radio mode Lights up when BLUETOOTH function is used. Lights up while the clock mode is selected. Lights up when Rear Camera mode is activated. Display preset No. Display frequency. Display example for CD mode Lights up when Song/File information is displayed. Lights up when Album name is displayed. Lights up when Artist name is displayed.
01GB00IVAD800E.book Page 72 Monday, February 28, 2011 11:35 AM Display example for VCD mode Information About DVDs Lights up when Track information is displayed. Display the Track No. Lights up when Repeat track function is activated. Lights up when BLUETOOTH function is used. Lights up while the clock mode or elapsed time mode is selected. Lights up when Rear Camera mode is activated. Display example for iPod mode Music CDs and DVDs have grooves (tracks) in which the digital data is recorded.
01GB00IVAD800E.book Page 73 Monday, February 28, 2011 11:35 AM Terminology Dolby Digital Dolby Digital is a digital audio compression technology developed by Dolby Laboratories that allows large quantities of audio data to be efficiently recorded on discs. It is compatible with audio signals from mono (1 channel) all the way up to 5.1channel surround sound. The signals for the different channels are completely independent, and since the sound is high quality digital there is no loss of sound quality.
01GB00IVAD800E.book Page 74 Monday, February 28, 2011 11:35 AM List of Language Codes (For details, see page 32.
01GB00IVAD800E.book Page 75 Monday, February 28, 2011 11:35 AM List of Country Codes (For details, see page 32.
01GB00IVAD800E.
01GB00IVAD800E.book Page 77 Monday, February 28, 2011 11:35 AM In Case of Difficulty If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected, or then consult your authorized Alpine dealer. Basic No function or display. • Vehicle’s ignition is off.
01GB00IVAD800E.book Page 78 Monday, February 28, 2011 11:35 AM MP3/WMA/AAC is not played back. • Writing error occurred. The CD format is not compatible. - Make sure the CD has been written in a supported format. Refer to “About MP3/WMA/AAC” (pages 17 and 18), then rewrite in the format supported by this device. Unit does not operate. • Monitor’s power is not turned on. - Turn on the monitor’s power. • Condensation. - Wait a while (about 1 hour) for the condensation to dry. No picture is produced.
01GB00IVAD800E.book Page 79 Monday, February 28, 2011 11:35 AM Indication for DVD/Video CD Indication for CD changer • No disc is inserted. - Insert a disc. • Although a disc is inserted, “No Disc” is displayed and the unit does not start to play or eject the disc. - Remove the disc by following these steps: Press for at least 3 seconds. • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to within operation range.
01GB00IVAD800E.book Page 80 Monday, February 28, 2011 11:35 AM Indication for iPod Mode • The Portable audio player is not verified. - You can solve the problem by reconnecting the Portable audio player. • Abnormal current is run to the USB connector device. - You can solve the problem by switching the source. • The iPod/iPhone is not connected. - Make sure the iPod/iPhone is correctly connected (refer to “Connections”). Make sure the cable is not bent excessively.
01GB00IVAD800E.book Page 81 Monday, February 28, 2011 11:35 AM CD/DVD SECTION Specifications Screen Size 7.0" LCD Type Transparent type TN LCD Operation System TFT active matrix Number of Picture Elements 384,000 pcs. (800 × 480) Effective Number of Picture Elements 99.
01GB00IVAD800E.book Page 82 Monday, February 28, 2011 11:35 AM Installation and Connections Before installing or connecting the unit, please read the following and pages 5 to 10 of this manual thoroughly for proper use. Caution HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. Warning MAKE THE CORRECT CONNECTIONS Failure to make the proper connections may result in fire or product damage. The wiring and installation of this unit requires special technical skill and experience.
01GB00IVAD800E.book Page 83 Monday, February 28, 2011 11:35 AM Installation 2 Screw Hex Nut (M5) Caution Bolt Stud Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire. IVA-D800E Metal Mounting Strap Air ventilation hole Ground Lead Rear of the Unit Chassis Front Frame (Included) Wider edge should face down. Installing the Monitor Reinforce the monitor unit with the metal mounting strap (not supplied).
01GB00IVAD800E.book Page 84 Monday, February 28, 2011 11:35 AM < JAPANESE CAR > To install using the vehicle’s genuine bracket. Flush head Screws (M4 × 5) (Included) Ground Lead IVA-D800E Mounting Bracket • Make sure to use the supplied flush head screw (M4 × 5) to install the monitor. If you use another screw to install the monitor, it may cause a malfunction. However, only if you cannot install with the flush head screws (M4 × 5), use the supplied screw (M4 × 6).
01GB00IVAD800E.book Page 85 Monday, February 28, 2011 11:35 AM Connections Antenna (Yellow) To Video Output terminal (Red) (White) To Audio Output terminals (R, L) (Yellow) To Video Input terminal (Red) To Audio Input terminals (R, L) (White) Rear Left Amplifier Rear Right Front Left Amplifier Front Right Subwoofers Amplifier To Navigation System To USB Memory/Portable audio player or iPod/iPhone To rearview camera such as HCE-C107D, etc.
01GB00IVAD800E.book Page 86 Monday, February 28, 2011 11:35 AM Antenna Receptacle Video Output Connector (AUX OUTPUT) (Yellow) Output the video. Audio Output Connectors (AUX OUTPUT) RED is right and WHITE is left output the audio. Video Input/Camera Input RCA Connector (AUX/CAMERA IN) (Yellow) Input the AUX video or use when connecting a rearview camera with RCA Output connector. • Set “AUX” in “Setting the Rear Camera Input” (page 42) when connecting a rearview camera with RCA Output connector.
01GB00IVAD800E.
01GB00IVAD800E.book Page 88 Monday, February 28, 2011 11:35 AM System Example Connect the Ai-NET compatible audio processor (Fiber optic digital compatible), Navigation system, DVD player and changer.
01GB00IVAD800E.book Page 89 Monday, February 28, 2011 11:35 AM Connecting iPhone/Video compatible iPod and Back-up Camera Rear camera (Sold Separately) HCE-C107D lock case iPhone/Video compatible iPod (Sold Separately) NORM EQ/DIV To Video Output terminal (Yellow) System Switch When connecting an equalizer or divider using Ai-NET feature, place the two switches in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.
01GB00IVAD800E.book Page 90 Monday, February 28, 2011 11:35 AM When Connecting External Equipment To Audio Input terminal Rear monitor (Sold Separately) To Video Input terminal NORM EQ/DIV To Video Output terminal DVE-5207,etc. (Sold Separately) To Audio Output terminal To Video Output terminal TV Tuner or VCR (Sold Separately) To Audio Output terminal (White/Pink) M.CONT M.CONT (White/Pink) * Connect this to the touch panel-compatible rear monitor.
01GB00IVAD800E.book Page 91 Monday, February 28, 2011 11:35 AM Video/Audio Input Connectors YELLOW is for input video, RED is right and WHITE is left input the audio. Video Input/Camera Input RCA Connector (AUX/CAMERA IN) (Yellow) Input the AUX video or use when connecting a rearview camera with RCA Output connector. • When you use this connector as normal AUX video input connector, set other than “AUX” in “Setting the Rear Camera Input” (page 42), and set “AUX1 IN” to ON in “Setting the AUX Mode”.
