Owner's Manual

44-EN
If this Message Appears
Various messages are displayed on the screen during operation. In
addition to the messages telling you the current status or providing
guidance for the next operation, there are also the following error
messages. If one of these error messages is displayed, carefully follow the
instructions in the solution column.
System
For your safety, this function is only available while the
vehicle is parked.
• A setup operation, etc., was carried out while the vehicle was
running.
- Move the vehicle to a safe location, stop, and engage the
parking brake, then carry out this operation.
This device is not supported.
• A USB flash drive with a hub is connected.
- You cannot play back from a USB flash drive with a hub. USB
hub connections are also not supported.
Audio/Visual
This device is not supported.
• An iPhone that is not supported by the unit is connected.
- Connect an iPhone that is supported by the unit.
• A USB device that is not supported by the unit is connected.
- Attempt to connect another USB flash drive.
•Communication error.
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPhone and the
unit, using the iPhone cable.
- Check the display by reconnecting between the USB flash drive
and the unit.
• Caused by the iPod/iPhone Software Version not being
compatible with this unit.
- Update the iPhone Software Version to be compatible with this
unit.
• The iPhone is not verified.
- Change to another iPhone.
Please check the connection status.
•Communication error.
- Check the display by reconnecting between the iPhone and the
unit, using the iPhone cable.
No Artist (/ No Song / No album)
• There are no data in the iPhone.
- Download data to the iPhone and connect to the unit.
• There are no tag-info in the USB Audio / iPod Audio.
No Files
• There are no data in the USB flash drive.
- Download data to the USB flash drive and connect to this unit.
Bluetooth
No Bluetooth device connected
• The Bluetooth audio device was not connected correctly.
- Check the settings for the unit and the Bluetooth audio device
and reconnect.
SiriusXM
Check Tuner
• The SiriusXM Tuner is disconnected or the unit is having trouble
communicating with the Tuner.
- Connect the Tuner or check the Tuner connection to the back
of the unit.
Check Antenna
• The SiriusXM Satellite Radio antenna or cable is either damaged
or not connected correctly to the SiriusXM Tuner.
- Check that the SiriusXM antenna cable is connected to the
SiriusXM Tuner and check that the antenna cable is not kinked
or otherwise damaged. Replace the antenna if necessary.
- SiriusXM products are available at your local car audio retailer
or online at www.shop.siriusxm.com.
No Signal
• The SiriusXM satellite signal is too weak at the current location.
- Move the vehicle to a location with a clear view of the southern
sky.
- Make sure the Satellite Radio antenna is properly mounted and
not obstructed by metal objects.
Channel [xxx] Not Subscribed
Call SiriusXM to Subscribe
• The active channel has become unsubscribed or the requested
channel is not available in your subscription package.
- In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if
you have questions about your subscription package or would
like to subscribe to this channel. In Canada, visit
www.siriusxm.ca or call 1-877-438-9677.
- The unit will revert to the previously selected channel or to
channel 1 automatically.
Channel [xxx] Not Available
• The active channel is no longer in the SiriusXM channel lineup
or the user has entered an invalid channel number.
- Visit www.siriusxm.com for information on the current
channel lineup.
• The unit will revert to the previous channel or to channel 1
automatically.
Subscription Updated
Press Any screen to Continue
•Your subscription has been updated.
- Touch [OK] to clear this message.
Channel [xxx] Locked
• A locked channel is selected.
- Input the passcode on the number keypad screen, see “Parental
Lock Function” (page 32). If wrong passcode is entered,
“Incorrect Pass Code entered” will be displayed and the unit
will revert to the previous channel.