Owner's Manual

39-EN
When an optional camera is connected, the view video of camera can be
output to the monitor.
Rear camera:
If a rear camera is connected, when the vehicle is reversed, the rear
camera view (guide marks for vehicle width and available distance) is
displayed automatically on the screen of this unit.
Front camera:
You can check the front of the vehicle with a bad visibility road.
Camera Operation
1 Touch the (HOME) button.
The HOME screen is displayed.
• If both “Primary” and “Secondary” are set to [Off] (page 23), the
[Camera] button cannot be selected.
2 To uc h [Camera].
The view of the camera which is set in the “Primary” setting is
displayed.
• If “Primary” is set to [Off], the view of the camera set in the
“Secondary” setting is displayed.
• Touch the screen when the camera image is displayed, and touch the
secondary camera button to switch to the secondary camera view
image.
• Touch the screen while the camera image is being displayed, and touch
[] to return to the main source screen or previous screen.
• You can perform a Guide Adjustment for the rear view image. For
details, see “About the Rear Camera Guide” (page 39).
1 Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
• If neither “Primary” and “Secondary” is set to [Rear] (page 23),
the rear view image is not displayed.
2 If you shift the gear lever to a position other than reverse
(R), the monitor returns to the previous screen.
• Touch the screen when the camera image is displayed, and touch the
secondary camera button to switch to the secondary camera view
image.
• Never depend solely on the camera when backing up. Always turn and
look and only use the camera for additional assistance.
• This function is effective when the reverse wire is properly connected.
• You can perform a Guide Adjustment for the rear view image. For
details, see “About the Rear Camera Guide” (page 39).
About the Rear Camera Guide
To display the guide, set “Turning the Rear Camera Guide On/Off ”
(page 23) to On. Also, to adjust the guide, see “Adjusting the Rear
Camera Guide” (page 24).
Indication mark meaning
When the car is put into reverse gear, the monitor switches to the rear
view camera image. Guides appear to help visualize the car’s width and
distance from the rear bumper.
Car width extension marks (red, yellow and green in
order of distance)
If properly calibrated, the marks indicate the car’s width. This
helps guide the car’s path when backing up in a straight line.
The marks represent the distance from the rear of the car (from
the rear end of the bumper).
• The marks do not move in synchronization with the steering
wheel.
• Set the marks to suit the car’s width.
Distance guidance marks
The marks represent the distance from the rear of the car (from
the rear end of the bumper).
• The marks do not move in synchronization with the steering
wheel.
• We recommend that you measure the actual distance to the
marks when parked on a level surface.
• Depending on the condition of the car or road surface, the range of
vision may vary.
• The camera has a limited range of vision. Objects at extreme angles to
the camera (e.g. under the bumper or at opposite ends of the bumper)
may not be in the its field-of-vision.
• The rear camera image may have a tint which is different from the
actual surroundings.
• Depending on the car, the guidance may deviate to the right or left. This
is not a malfunction.
Camera Operation
(Optional)
You can adjust the quality of the camera image.
Setting items: Brightness / Color / Contrast
See “Camera Picture Quality Setup” (page 23).
Displaying the Camera Image from the Menu
screen
Displaying the rear view video while the car is
in reverse
[Camera] button