Owner's Manual

36-EN
You can make a telephone call by using voice operation.
• Connect your smartphone to the unit via Bluetooth, then set to “Hands-
free” or “Both” (page 22).
1 To uc h [] button.
The Voice Dial mode screen is activated.
2 Say the telephone number* or name* you want to call,
into the microphone.
* The number and name depend on the voice dial information stored
in the smartphone.
3 To finish the Voice Dial mode, touch [ ].
• You can perform this operation only when a voice dial compatible
smartphone is connected.
• The Voice Dial function performance depends on the recognition range
of the smartphone and mounting location of the microphone.
Note when the microphone is mounted.
• Voice dial operation depends on the function being available on the
smartphone. For details, refer to the owner’s manual of the smartphone.
• Depending on the smartphone, the Voice Dial operation may finish
automatically.
• For adjusting the volume, see “Adjusting the Speech Volume” (page 36).
Phone Operation Screen
You can adjust Caller Level and Mic. Level (Microphone Level).
1 To uc h [].
2 To uc h [] or [] of “Mic Vol.” or “Caller Vol.”
You can adjust the volume in 11 levels.
• This operation is not available for the Private Call setting.
The voice output for calls is switchable between car speakers and the
mobile phone speaker.
To uc h [Private] or [Handsfree].
• Depending on the mobile phone, this operation may not be possible.
Transmits a DTMF (Touch-Tone) during a call.
1 To uc h [] (Keypad).
The number input screen (Keypad) appears.
2 Input number.
• You can transmit a Touch-Tone signal during a call.
Voice Dial Function
Adjusting the Speech Volume
Changing the Voice Output
DTMF (Touch-Tone) Function