Owner's Manual
Table Of Contents
- Alpine Receiver
- Owner's Manual
- Contents
- Operating Instructions
- Getting Started
- Setup
- General Setup
- Connection (Bluetooth) Setup
- Camera Setup
- Sound Setup
- Apple CarPlay (Optional)
- Android Auto (Optional)
- Radio/HD Radio™/RBDS
- Radio Basic Operation
- Listening to the Radio
- Presetting Stations Manually
- Presetting Stations Automatically
- Tuning to Preset Station
- Receiving a Multicast (HD Radio™ Mode only)
- Forced Analog Mode
- Selecting the Receivable Program Type (RBDS FM Radio Mode only)
- Using Ballgame Mode (HD Radio™ Mode only)
- Displaying Radio Text (HD Radio™/RBDS FM Radio mode only)
- About the Feature Logos
- USB Flash drive (Optional)
- USB Audio
- USB Video
- USB Photo
- iPod mode on iPhone (Optional)
- SiriusXM Satellite Radio Operation (Optional)
- HDMI Device (Optional)
- Bluetooth Operation
- Hands-free Phone Control
- Bluetooth Audio
- Auxiliary Device (Optional)
- Camera Operation (Optional)
- iDataLink Operation
- Information
- Installation and Connections
- LIMITED WARRANTY
- Quick Reference Guide
- Warranty
- Owner's Manual
- Alpine Amplifier
LhcAur10N
This symbol means
important
instructions. Failure
to
heed them can result in injury
or
material
property damage.
HALT
USE
IMMEDIATELY IF A
PROBLEM
APPEARS.
Failure to
do
so
may cause personal injury
or
damage
to
the product.
Return it to
your
authorized Alpine dealer
or
the nearest Alpine Service
Center for repairing.
HAVE
THE WIRING AND INSTALLATION DONE
BY
EXPERTS.
The
wiring
and
installation
of
this unit requires special technical skill
and
experience. To ensure safety, always contact the dealer where you
purcha.~ed this product to have the work done.
USE
SPECIFIED
ACCESSORY
PARTS
AND
INSTALL
THEM
SECURELY.
Be
sure
to
use only the specified accessory parts. Use
of
other
than
designated parts may damage this unit internally
or
may not securely
imtall the unit in place. This may cause parts
to
become loose resulting
in
hazards
or
product failure.
ARRANGE
THE WIRING
SO
IT
IS
NOT CRIMPED
OR
PINCHED
BY
A SHARP METAL
EDGE.
Route the cables and wiring away from moving parts (like the seat rails)
or
sharp
or
pointed edges. This will prevent crimping and damage to the
wiring. If wiring passes through a hole in metal, use a rubber grommet
to prevent the wire's insulation from being cut by the metal edge
of
the
hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR
DUST.
Avmd installing the unit m locations with high incidence
of
moisture
or
dust. ~1oisturc
or
dust that penetrates into this unit may result in
product failure,
3 -EN