Owner's Manual
Table Of Contents
- Alpine Receiver
- Owner's Manual
- Contents
- Operating Instructions
- Getting Started
- Setup
- General Setup
- Connection (Bluetooth) Setup
- Camera Setup
- Sound Setup
- Apple CarPlay (Optional)
- Android Auto (Optional)
- Radio/HD Radio™/RBDS
- Radio Basic Operation
- Listening to the Radio
- Presetting Stations Manually
- Presetting Stations Automatically
- Tuning to Preset Station
- Receiving a Multicast (HD Radio™ Mode only)
- Forced Analog Mode
- Selecting the Receivable Program Type (RBDS FM Radio Mode only)
- Using Ballgame Mode (HD Radio™ Mode only)
- Displaying Radio Text (HD Radio™/RBDS FM Radio mode only)
- About the Feature Logos
- USB Flash drive (Optional)
- USB Audio
- USB Video
- USB Photo
- iPod mode on iPhone (Optional)
- SiriusXM Satellite Radio Operation (Optional)
- HDMI Device (Optional)
- Bluetooth Operation
- Hands-free Phone Control
- Bluetooth Audio
- Auxiliary Device (Optional)
- Camera Operation (Optional)
- iDataLink Operation
- Information
- Installation and Connections
- LIMITED WARRANTY
- Quick Reference Guide
- Warranty
- Owner's Manual
- Alpine Amplifier
56-EN
■
Vehicle Information screen example
You can check for open doors, check the tire pressure, the
battery life, etc. for the vehicle.
■
Car Setting screen example (Generic List
screen)
The Generic List/Popup Window/Current source control
screen is displayed.
About Parking Sensor screen
The Parking sensor screen turns on when the front or rear
sensor on your vehicle detects an obstacle within a certain
distance.
Parking Sensor Full screen example
When the front or rear sensor detects an obstacle within a
certain distance, the Parking Sensor screen is displayed, and
the indicator (
- ) that corresponds with that area lights
up.
Indicator colors when an obstacle is detected.
Red: close distance
Orange: medium distance
Yellow: long distance
• Depending on the speed of the vehicle, when moving faster
than a certain speed, the Parking Sensor screen may not be
displayed.
• Vehicles that do not have the obstacle detection sensor cannot
use this function.
Parking Sensor Camera interlock screen example
(Rear camera)
You can check for obstacles through an interlocked camera
image by connecting a Rear Camera or Front Camera.
• Touch the Camera image area to switch to the Camera full
screen.
(While displaying the Camera full screen, touch the Camera
screen, then touch [
] to return to the Parking Sensor
Camera interlock screen.)
• Touch the car icon to switch to the Parking sensor full screen.
(Touch [
] on the Parking Sensor full screen to return to
the Parking Sensor Camera interlock display.)
• To use this function, set the Camera Select setting of the Rear
Camera and Front Camera, to “Rear” or “Front”. For details,
see “Camera Input Setting” (page 21 or page 23).
Factory Media Operation
You can operate the Factory Audio (USB/iPod/Bluetooth
Audio) from this unit.
Touch the (HOME) button to select Factory
Media mode.
The display shows the Factory Media mode screen.
• For the basic operations on Factory Media mode, refer to
“USB Audio” (page 35), “iPod mode on iPhone (Optional)”
(page 39) and “Bluetooth Audio” (page 49).
Swipe to the right or left to change to the Function mode.
• Available functions differ depending on your vehicle.