Owner's Manual
Table Of Contents
- Alpine Receiver
- Owner's Manual
- Contents
- Operating Instructions
- Getting Started
- Setup
- General Setup
- Connection (Bluetooth) Setup
- Camera Setup
- Sound Setup
- Apple CarPlay (Optional)
- Android Auto (Optional)
- Radio/HD Radio™/RBDS
- Radio Basic Operation
- Listening to the Radio
- Presetting Stations Manually
- Presetting Stations Automatically
- Tuning to Preset Station
- Receiving a Multicast (HD Radio™ Mode only)
- Forced Analog Mode
- Selecting the Receivable Program Type (RBDS FM Radio Mode only)
- Using Ballgame Mode (HD Radio™ Mode only)
- Displaying Radio Text (HD Radio™/RBDS FM Radio mode only)
- About the Feature Logos
- USB Flash drive (Optional)
- USB Audio
- USB Video
- USB Photo
- iPod mode on iPhone (Optional)
- SiriusXM Satellite Radio Operation (Optional)
- HDMI Device (Optional)
- Bluetooth Operation
- Hands-free Phone Control
- Bluetooth Audio
- Auxiliary Device (Optional)
- Camera Operation (Optional)
- iDataLink Operation
- Information
- Installation and Connections
- LIMITED WARRANTY
- Quick Reference Guide
- Warranty
- Owner's Manual
- Alpine Amplifier
18-EN
Adjusting the Dimmer of Button
Lighting at Night
You can adjust the brightness of the button lighting at
night with the dimmer.
Setting item:
Key Illumination Level
Setting level:
-2 to 2 (Initial setting: 0)
• This setting is only available when “Dimmer” is set to [On] or
[Auto].
Date/Clock Setup
[Date/Clock] is selected on the General Setup Menu screen.
You can set the display type of the Date/Clock adjustment
and the clock display to 12-hours or 24-hours, depending
on your preference.
Setting item:
Date/Clock
Touch [ ] or [ ] to adjust the day, month, year,
hour, minute and AM/PM.
• To change to 24-hour, set “24H” to [On] ( ).
• To set the daylight saving time (Summer Time mode), set
“DST” to [On] (
).
Display Off Setting
When [Display Off] is selected on the General Setup Menu
screen, the display is turned Off.
Setting item:
Display Off
• To cancel Display Off mode, touch the screen or any button.
• Display Off mode is canceled when the power or ACC is
turned off.
• When the gear lever is shifted to the reverse (R) position and
the rear camera is connected, the rear camera image is
displayed.
• When a call is received on a Bluetooth-connected phone, the
incoming call screen is displayed.
• You can also activate Display Off mode directly by touching
the [Display Off] widget on the HOME screen.
About iLX-407
[About] is selected on the General Setup Menu screen.
[About] enables you to check the Serial No., Firmware
Version, Model Name, and to initialize various settings.
Displaying the Product Information
You can view the version information of this product. Make
note of this information and refer to it whenever you
contact Alpine Tech Support or an Alpine-authorized dealer.
Setting item:
Version Information
Setting contents:
Serial No. / SYSTEM version / Firmware Version
Displaying Warranty/Copyright
Information
Setting item:
Warranty/Copyright Information
Setting contents:
Open source licenses / Notice
Initializing the System
You can initialize all data, to restore the factory settings.
Remove the USB flash drive, etc. from the system before
operation.
1 Touch [Restore Factory Setting].
2 After the confirmation message appears,
touch [Yes].
The confirmation screen appears.
3 Touch [Confirm].
The system starts initialization.
• Do not turn on/off the power, change the ignition key position
or remove the screen panel until system restart is completed.