Owner's Manual

16-EN
Signal Strength Information
While listening to a SiriusXM Channel, the Signal strength of
the current channel will be displayed.
Setting item:
Signal Indicator
This menu item displays the SiriusXM signal strength as
Excellent, Good, Weak or No Signal.
• If the Signal indicator reports Weak or No Signal and your
vehicle is parked outside with no obstructions to the southern
sky, then your SiriusXM antenna may not be properly
installed or may have become damaged.
AUX Setup
[AUX] is selected on the General Setup Menu screen.
■
Usable 4-pole mini AV plug
The unit accepts the following 4-pole mini AV plug pin-out:
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)
• Please check pin-out carefully before use of this product.
Depending on the cable, there may be no picture and/or
sound.
Setting the AUX Select
You can set up the connected AUX device.
Setting item:
AUX Select
Setting contents:
AUX (Initial setting) / Factory Media + Drive Recorder
• When “AUX” is set, audio will not be output from Factory
Media or Factory SiriusXM mode.
• When “Factory Media + Drive Recorder” is set, AUX In Audio
will be used by the Factory Media and Factory SiriusXM
mode. Only AUX In Video will be output in the AUX mode.
Audio will not be output.
Setting the Input Signal
The video input signal type can be chosen.
Setting item:
Input Signal
Setting contents:
NTSC (Initial setting) / PAL
Setting the Display Mode
You can switch the Display Mode of the video file to be
played.
Setting item:
Display Mode
Setting contents:
Full (Initial setting) / 4.3
Language Setup
[Language] is selected on the General Setup Menu screen.
The Setup menu, feedback information, etc. for this unit can
be changed to appear in the selected language.
Setting item:
Language
Setting contents:
English (Initial setting) / Deutsch / Français / Español /
Italiano / Português / Polski / Nederlands / Dansk /
Suomi / Norsk / Svenska / Slovenčina / Čeština / Magyar
/ Ελληνικά / Türkçe / русский /
/ / / Bahasa
Indonesia / Bahasa Melayu / Tiếng Việt /
/
• The currently selected language is displayed.