Owner`s manual

9-EN
Presetting Stations Automatically
1 Press BAND repeatedly until the desired radio band
is displayed.
2 Press and hold TUNE/A.ME for at least 2 seconds.
“Auto Memory” is displayed while the automatic memory is
in progress. The tuner will automatically seek and store 6
strong stations in the selected band. They will be stored 1 to
6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1 Press BAND repeatedly until the desired band is
displayed.
2 Press PRESET.
The Preset screen is displayed.
3 Turn the Center Jog Dial to select a radio station.
4 Press ENT.
The display shows the band, preset number and frequency
of the station selected.
Receiving a Multicast Station
(HD Radio mode only)
Multicasting which is the Ability to broadcast multiple program streams
over a single FM frequency thereby increasing the amount and diversity
of content choices. A maximum of eight multicast station channels can
be selected on this unit.
1 When multicast station is received, the program
number is displayed.
2 Press /SEARCH to display the Program Type
screen.
3 Turn the Center Jog Dial to select a program, and
press ENT.
The selected program is received.
Program Service example:
Changing the Display (HD Radio mode
only)
Press VIEW.
Every time VIEW is pressed changes the display.
* You can set a long or short HD Radio station name. Refer to “HD
Radio Station Call Setting” (page 22).
Program No.
Multicast Radio Station Program No. Program Service
88.8MHz No.1 MPS : Main Program Service
88.8MHz No.2 SPS: Sub-program Service
88.8MHz No.3 SPS: Sub-program Service
·
·
·
88.8MHz No.8 SPS: Sub-program Service
Song title
Album title
Artist title
Frequency
Station Call
Letter*
Calendar/
Time
Song title
Album title
Artist title
Frequency